IS220PAICH1A | Mark VIe Isolated Analog Input | New Surplus

Description

Product Introduction

The GE IS220PAICH1A is a VMEbus isolated analog input board from the Mark VIe Speedtronic series, purpose-built for high-accuracy measurement of process signals in turbine control applications. This board interfaces with field devices such as pressure transmitters, temperature transmitters, flow meters, and position transducers to provide critical process data for turbine control, protection, and monitoring. The H1A revision features robust isolation, 16-bit resolution, and comprehensive diagnostics.

What sets the PAICH1A revision apart is its 8-channel capacity with full isolation (2,500 VDC between channels and backplane), software-selectable input types (4–20 mA or 0–10 V), 16-bit resolution, and per-channel diagnostics including open-circuit and overrange detection. The board includes a built-in loop power supply for 2-wire transmitters, programmable filter time constants, and online calibration verification. For system integrators requiring reliable, isolated analog input capability with comprehensive diagnostics for turbine control systems, this board is the direct OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Full Channel Isolation: 2,500 VDC isolation between channels and backplane—eliminates ground loops and protects the control system from field wiring faults.
• Dual Input Type Support: Software-selectable 4–20 mA or 0–10 V per channel—flexible for a wide range of field devices.
• Built-in Loop Power: 24 VDC at 25 mA per channel—supports 2-wire transmitters without external power supplies.
• 16-Bit Resolution: High accuracy for precise measurement of critical process parameters.
• Per-Channel Diagnostics: Open-circuit and overrange detection for rapid fault identification.
• Online Calibration Verification: Software-initiated calibration check verifies accuracy without removing the board.
• Live Test Verified: Every board undergoes a 48-hour burn-in with all 8 channels exercised across the full input range. We log accuracy, isolation integrity, diagnostic performance, and temperature stability.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and configuration before shipment.

Frequently Asked Questions (FAQ)

Q: What is the difference between IS220PAICH1A and IS200ISUCG1A?

A: Both boards provide 8 analog inputs with similar specifications. The PAICH1A is a newer revision with improved diagnostics and firmware compatibility. Verify with your existing system before replacing. In most cases, they are interchangeable.

Q: What is the difference between IS220PAICH1A and IS220PAICH1B?

A: The H1B revision typically includes enhanced diagnostics or minor performance improvements. The H1A is the base revision. Check your existing board—if you have H1B, verify compatibility. In most cases, H1A and H1B are interchangeable, but confirm with the board’s firmware requirements.

Q: What is the benefit of the 2,500 VDC isolation?

A: The 2,500 VDC isolation protects the backplane and control system from field wiring faults, ground loops, and transient voltages. It also allows you to connect transmitters located far from the cabinet without worrying about ground potential differences. This is critical for reliable operation in industrial environments.

Q: Can I use this board with both 2-wire and 4-wire transmitters?

A: Yes. The built-in loop power supply (24 VDC) supports 2-wire transmitters (loop-powered). For 4-wire transmitters (externally powered), you can disable the loop power on each channel and use the board’s differential input configuration. Input type (current or voltage) is software-selectable per channel.

Q: What is the open-circuit detection feature?

A: The PAICH1A continuously monitors each analog input for open-circuit conditions. If the current drops below 1 mA (current mode) or the voltage drops below 0.1 V (voltage mode), the board flags an open-circuit diagnostic. This provides early warning of a broken sensor or wiring fault.

Q: What is the online calibration verification feature?

A: The PAICH1A includes a software-initiated calibration verification that checks the board’s accuracy against an internal reference without removing the board from service. This allows you to verify measurement accuracy during scheduled maintenance without interrupting process monitoring. We recommend running calibration verification every 12 months.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews pull a PAIC while the cabinet was still powered—it damaged the analog input circuits and the backplane connector. Don’t risk it.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS220PAICH1A is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220PAIC (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t solve my analog input issue?

A: If the board is electrically functional (passes our QC test) but doesn’t correct your fault, we’ll accept a return within 30 days provided the board shows no physical damage and the connectors are intact. We do charge a 15% restocking fee if the fault was due to field wiring issues, configuration errors, or toolkit compatibility problems. We’ll work with you over the phone or email to diagnose the problem before we ship—our goal is to get you running, not to ship boxes back and forth.

IS200BPIAG BALANCE OF PLANT ANA
IS200BPIAG1A BALANCE OF PLANT ANA
IS200BPIBG PHASE LOGIC INTERFAC