IS215GFOIH1ABA | GE GFOI Digital Output Module | Original Packaging

Description

Product Introduction

The GE IS215GFOIH1ABA is a VMEbus digital output board from the Mark VIe Speedtronic series, purpose-built for high-density discrete output control in turbine applications. This board provides optically isolated outputs for controlling field devices such as solenoid valves, contactors, alarms, and annunciators—critical for turbine sequencing, protection, and operator indication. The “ABA” suffix indicates a maximum environment conformal coated board with the highest level of moisture, chemical, and particulate protection available, combined with the H1A revision features.

What sets the GFOIH1ABA revision apart is its 32-channel capacity with full optical isolation (2,500 VDC), high-speed scanning (1 ms for all 32 channels), per-channel status monitoring, output state verification, and the premium-grade urethane conformal coating that provides maximum protection in the harshest operating conditions. Each output features 24 VDC nominal with a 0.5 A continuous current rating per channel, short-circuit protection, and over-temperature protection. For system integrators requiring high-density, reliable digital output capability with maximum environmental protection in the most aggressive environments, this board represents the ultimate OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Maximum Environment Coating Advantage: The “ABA” suffix provides the thickest, most robust premium urethane coating (0.10–0.18 mm) rated for continuous exposure to high humidity, salt fog, chemical vapors, and airborne particulates. This is the ultimate protection variant for offshore platforms, coastal installations, desalination plants, chemical processing, pulp and paper mills, and mining operations.
• High Channel Density: 32 digital outputs on a single VME slot—reduces chassis space requirements and system cost.
• Full Optical Isolation: 2,500 VDC isolation protects the backplane and control system from field wiring faults.
• Output State Verification: Per-channel read-back confirms the commanded output state—critical for diagnostic and safety applications.
• Short-Circuit Protection: Per-channel protection with auto-recovery prevents damage to output drivers.
• High-Speed Scanning: 1 ms scan rate for fast output response in protection and interlock applications.
• Current Capacity: 0.5 A continuous per channel—supports direct control of small solenoid valves and contactors.
• Live Test Verified: Every board undergoes a 48-hour burn-in with all 32 outputs exercised under load. We log response time, short-circuit protection, and diagnostic performance. Coated boards are visually inspected for complete coverage, thickness consistency, and absence of bubbles, voids, or pinholes using magnification and UV light.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and configuration before shipment.

Frequently Asked Questions (FAQ)

Q: What does the “ABA” suffix mean on IS215GFOIH1ABA?

A: The “ABA” indicates maximum environment conformal coating combined with the H1A revision. Specifically, it means the board has a premium-grade urethane conformal coating (0.10–0.18 mm) applied to the entire PCB assembly for the highest level of moisture, chemical, and particulate protection, along with all H1A features (32 outputs, 2,500 VDC isolation, 0.5 A output current). The coating adds protection; the H1A features provide high-density digital output capability.

Q: What is the difference between IS215GFOIH1AB and IS215GFOIH1ABA?

A: The AB has standard conformal coating (0.02–0.05 mm); the ABA has maximum premium urethane coating (0.10–0.18 mm). The ABA provides the absolute highest level of protection for the most severe environments—offshore with continuous salt spray, chemical plants with corrosive vapors. If your environment is extremely aggressive, ABA is recommended. For standard harsh environments, AB is sufficient.

Q: Does the maximum coating affect digital output performance, protection, or diagnostics?

A: Good question. The coating adds about 0.15 mm to the board thickness, which does not affect VME slot fitment—clearances are designed for it. Current capacity, protection thresholds, and diagnostic performance are identical to the non-coated H1A. The coating only provides environmental protection. Do not remove the coating or scrape it off—it voids the warranty and compromises protection.

Q: What type of outputs does this board support—sourcing or sinking?

A: The GFOIH1ABA provides sourcing outputs—the board supplies the 24 VDC to the field device. Each channel has a dedicated output terminal and a common return. If your field devices require sinking outputs, you’ll need a different module or an external interface.

Q: Can I use this board to directly control solenoid valves?

A: Yes—with a caveat. The outputs are rated for 0.5 A continuous per channel. For small solenoid valves within this current rating, direct control is possible. For larger solenoids or inductive loads, we recommend using an interposing relay or contactor. Always install a suppression diode across DC coils to protect the output driver from back-EMF.

Q: What is the output state verification feature?

A: The GFOIH1ABA reads back the actual output state and compares it to the commanded state. If the output does not respond as commanded—due to a short circuit, open circuit, or driver failure—the board reports a fault. This is critical for safety applications where you need to verify that the output achieved the desired state.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews pull a GFOI while the cabinet was still powered—it damaged the output drivers and the backplane connector. Don’t risk it.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS215GFOIH1ABA is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220GFOI (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t solve my digital output issue?

A: If the board is electrically functional (passes our QC test) but doesn’t correct your fault, we’ll accept a return within 30 days provided the board shows no physical damage and the connectors are intact. We do charge a 15% restocking fee if the fault was due to field wiring issues, configuration errors, or toolkit compatibility problems. We’ll work with you over the phone or email to diagnose the problem before we ship—our goal is to get you running, not to ship boxes back and forth.

IS200 RAPAG1A BD,RACK POWER SUPPLY
IS200 RAPAG1B BD,RACK POWER SUPPLY
IS200 RCSAG BD,1800A RC SNUBBER