IS215ACLEH1BCB | Mark VIe Analog Input Board | OEM New

Description

Product Introduction

The GE IS215ACLEH1BCB is a VMEbus isolated analog input board from the Mark VIe Speedtronic series, purpose-built for high-accuracy measurement of process signals in turbine control applications. This board interfaces with field devices such as pressure transmitters, temperature transmitters, flow meters, and position transducers to provide critical process data for turbine control, protection, and monitoring. The “BCB” suffix indicates a heavy conformal coated board with enhanced moisture, chemical, and contaminant resistance for harsh environments, combined with the enhanced H1B revision features.

What sets the ACLEH1BCB revision apart is its 8-channel capacity with full isolation (2,500 VDC between channels and backplane), software-selectable input types (4–20 mA or 0–10 V), 18-bit resolution for superior measurement accuracy, advanced diagnostics including open-circuit, overrange, and out-of-range detection, and the thicker urethane or acrylic conformal coating that provides superior protection in harsh environments. The board includes a built-in loop power supply for 2-wire transmitters, programmable filter time constants, and online calibration verification. For system integrators requiring high-accuracy isolated analog input capability with advanced diagnostics and enhanced environmental protection in aggressive installations, this board is the direct OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Heavy Conformal Coating for Extreme Environments: The “BCB” suffix provides a thicker, more robust coating (0.05–0.13 mm) that protects analog input circuitry against high humidity, salt fog, and chemical exposure. This is the preferred variant for offshore platforms, coastal installations, desalination plants, and chemical processing facilities.
• Enhanced 18-Bit Resolution: Superior measurement accuracy for critical process parameters.
• High Accuracy: ±0.04% typical accuracy for the most demanding control applications.
• Full Channel Isolation: 2,500 VDC isolation between channels and backplane—eliminates ground loops and protects the control system from field wiring faults.
• Dual Input Type Support: Software-selectable 4–20 mA or 0–10 V per channel—flexible for a wide range of field devices.
• Built-in Loop Power: 24 VDC at 30 mA per channel—supports 2-wire transmitters with higher power requirements.
• Advanced Diagnostics: Open-circuit, overrange, and out-of-range detection for comprehensive fault identification.
• Enhanced Filtering: Improved 50/60 Hz noise rejection for electrically noisy environments.
• Faster Scan Rate: 35 ms for all 8 channels—improved response for control applications.
• Live Test Verified: Every board undergoes a 48-hour burn-in with all 8 channels exercised across the full input range. We log accuracy, isolation integrity, diagnostic performance, and temperature stability. Coated boards are visually inspected for complete coverage, thickness consistency, and absence of bubbles, voids, or pinholes.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and configuration before shipment.

Frequently Asked Questions (FAQ)

Q: What does the “BCB” suffix mean on IS215ACLEH1BCB?

A: The “BCB” indicates heavy conformal coating combined with the H1B enhanced revision. Specifically, it means the board has a thicker urethane or acrylic conformal coating (0.05–0.13 mm) applied to the entire PCB assembly for maximum moisture, chemical, and contaminant protection, along with all H1B features (18-bit resolution, ±0.04% accuracy, 35 ms scan rate, advanced diagnostics). The coating adds protection; the H1B features provide enhanced measurement accuracy and diagnostic capability.

Q: What is the difference between IS215ACLEH1BCB and IS215ACLEH1A?

A: The H1BCB is a significant upgrade over H1A: 18-bit resolution vs. 16-bit, better accuracy (±0.04% vs. ±0.1%), faster scan rate (35 ms vs. 50 ms), advanced diagnostics including out-of-range detection, enhanced filtering, and heavy conformal coating. The H1BCB also requires Mark VIe Toolkit v6.5 or higher vs. v6.0 for H1A. If you need higher accuracy, advanced diagnostics, and heavy coating, choose H1BCB.

Q: What is the difference between IS215ACLEH1BCB and IS215ACLEH1B?

A: The H1B is non-coated with enhanced features; the H1BCB has the same H1B enhancements plus heavy conformal coating. The coating protects against humidity, salt fog, and chemical vapors. If your cabinet is in a coastal area, offshore platform, or harsh environment, the BCB variant is strongly recommended. In a clean environment, the H1B is sufficient and costs less.

Q: Does the heavy coating affect analog input performance, isolation, or diagnostics?

A: Good question. The coating adds about 0.1 mm to the board thickness, which does not affect VME slot fitment—clearances are designed for it. Analog input accuracy, isolation voltage, and diagnostic performance are identical to the non-coated H1B. The coating only provides environmental protection. Do not remove the coating or scrape it off—it voids the warranty and compromises protection.

Q: What is the benefit of the 18-bit resolution?

A: 18-bit resolution provides approximately 262,000 counts vs. 65,000 counts for 16-bit—four times the measurement resolution. This enables detection of the smallest signal changes—critical for applications requiring high precision such as high-accuracy flow measurement and critical pressure control.

Q: Can I use this board with both 2-wire and 4-wire transmitters?

A: Yes. The built-in loop power supply (24 VDC) supports 2-wire transmitters (loop-powered) with up to 30 mA per channel. For 4-wire transmitters (externally powered), you can disable the loop power on each channel and use the board’s differential input configuration.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews pull an ACLE while the cabinet was still powered—it damaged the analog input circuits and the backplane connector. Don’t risk it.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS215ACLEH1BCB is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220ACLE (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t solve my analog input issue?

A: If the board is electrically functional (passes our QC test) but doesn’t correct your fault, we’ll accept a return within 30 days provided the board shows no physical damage and the connectors are intact. We do charge a 15% restocking fee if the fault was due to field wiring issues, configuration errors, or toolkit compatibility problems. We’ll work with you over the phone or email to diagnose the problem before we ship—our goal is to get you running, not to ship boxes back and forth.

IS200 ISBBG2A INSYNC BUS BYPASS
IS200 ISBDG INSYNC DELAY
IS200 ISBDG1A INSYNC DELAY