IS205DSRGG1A | Mark VIe Digital Input/Output | New Surplus

Description

Product Introduction

The GE IS205DSRGG1A is a VMEbus digital input and relay output board from the Mark VIe Speedtronic series, purpose-built for combined discrete signal monitoring and contact output control in turbine applications. This board provides a versatile interface for field devices—handling both input monitoring and output control in a single module. It interfaces with pushbuttons, limit switches, and relay contacts while also providing dry contact outputs for alarms, annunciators, and simple control functions. The G1A revision features enhanced diagnostics and improved response time.

What sets the DSRGG1A revision apart is its 16 digital input channels with optical isolation (2,500 VDC), 16 form A (SPST) relay output channels with status monitoring, and a balanced architecture that provides both sensing and control capability in a single VME slot. Each input features 24 VDC nominal with wide tolerance (18–32 VDC) and programmable debounce filtering. Each relay output is rated for 250 VAC/2 A or 30 VDC/2 A with coil status read-back. For system integrators requiring a balanced, space-efficient digital I/O solution for turbine control applications, this board is the direct OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Combined I/O Capability: 16 inputs and 16 outputs on a single VME slot—reduces chassis space requirements and system cost.
• Full Isolation: 2,500 VDC isolation on inputs and relay coils—protects the backplane from field wiring faults.
• Configurable Input Filtering: Software-programmable debounce filtering (1–32 ms) eliminates false triggers from contact bounce.
• Status Monitoring: Per-channel coil status read-back verifies commanded output state—critical for diagnostic and safety applications.
• High Channel Count: 32 total I/O points (16 in + 16 out)—efficient solution for moderate-density applications.
• Wide Voltage Tolerance: Inputs accept 18–32 VDC—compatible with industrial 24 VDC supply variations.
• Long Contact Life: 100,000 cycles at rated load—reduces maintenance frequency.
• Live Test Verified: Every board undergoes a 48-hour burn-in with all inputs exercised and outputs cycled under load. We log input response, output operation, isolation integrity, and diagnostic performance.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and configuration before shipment.

Frequently Asked Questions (FAQ)

Q: What is the difference between IS205DSRGG1A and IS200WDIIH3A?

A: The DSRGG1A provides a combined solution with 16 inputs and 16 outputs on a single board. The WDII provides 32 inputs only (no outputs). Choose DSRGG1A for balanced applications requiring both input and output capability. Choose WDII for applications requiring maximum input density only.

Q: What is the difference between IS205DSRGG1A and IS2020DRLYH1A?

A: The DRLYH1A provides 32 relay outputs only (no inputs). The DSRGG1A provides 16 inputs and 16 outputs in a balanced configuration. Choose DRLYH1A for applications requiring maximum output density. Choose DSRGG1A for applications requiring both inputs and outputs.

Q: What type of digital inputs does this board support?

A: The DSRGG1A supports sourcing inputs—the field device provides the 24 VDC signal to the module. Each channel has a dedicated input terminal and a common return. The board does not support sinking inputs. If you have sinking field devices, you’ll need a different module or an external interface.

Q: What is the input filter and why is it important?

A: The input filter eliminates false triggers from contact bounce and electrical noise. You can configure the filter time from 1 ms (minimal filtering, fastest response) to 32 ms (maximum filtering, slowest response). For protection channels, use minimal filtering for fastest response. For operator indication or status monitoring, use longer filtering to prevent nuisance alarms.

Q: Can the relay outputs be used for direct control of field devices?

A: Yes—with a caveat. The relays are rated for 2 A at 30 VDC or 2 A at 250 VAC. For devices within this current rating, direct control is possible. For larger loads or inductive devices, we recommend using an interposing relay or contactor. Always install suppression diodes across DC coils or RC snubbers across AC coils to protect relay contacts.

Q: What is the output status monitoring feature?

A: The DSRGG1A reads back the actual coil status and compares it to the commanded state. If the coil does not energize or de-energize as commanded, the board reports a fault. This is critical for safety applications where you need to verify that the output achieved the desired state.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews pull a DSRG while the cabinet was still powered—it damaged the input and output circuits. Don’t risk it.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours of order placement and payment confirmation. For international orders, add 3–5 days for customs. If you need expedited (overnight air), we can do that, but you’ll need to coordinate with our logistics team for the cut-off time.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS205DSRGG1A is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220DSRG (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level. If you’re in a SIL environment, we can source the correct variant but it will have a different model number.

Q: What’s your return policy if this doesn’t solve my digital I/O issue?

A: If the board is electrically functional (passes our QC test) but doesn’t correct your fault, we’ll accept a return within 30 days provided the board shows no physical damage and the connectors are intact. We do charge a 15% restocking fee if the fault was due to field wiring issues, configuration errors, or toolkit compatibility problems. We’ll work with you over the phone or email to diagnose the problem before we ship—our goal is to get you running, not to ship boxes back and forth.

ALH#5748.2 ALTECH INTERFACE MODULE SPEC
CR2810A14DG MACHINE TOOL RELAY
DS200 DACA TC2000 AC/DC CONV.