IS200VPROH1BCB | GE Mark VIe VPRO Board | In Stock

Description

Product Introduction

The GE IS200VPROH1BCB is a VMEbus processor board from the Mark VIe Speedtronic series, purpose-built for heavy-duty turbine control in power generation and oil & gas applications. This board acts as the primary computational engine executing turbine protection logic, speed/load control, and sequence-of-events recording. The “BCB” suffix indicates a conformal coated board for improved moisture and contaminant resistance compared to non-coated variants.

What sets the H1BCB revision apart is the updated boot flash, increased SDRAM density, and the acrylic conformal coating that protects component leads in humid or lightly corrosive environments. This translates to faster application load times, more headroom for complex control algorithms, and better field reliability in coastal or high-humidity installations. For system integrators maintaining legacy Mark VIe cabinets, this board is the direct OEM replacement—no adapter frames or firmware recompilation required if you match your existing revision level.

Key Technical Specifications

Key Selling Points & Differentiators

• Conformal Coating Advantage: The “B” suffix provides acrylic coating that protects against humidity, dust, and mild corrosive atmospheres. This is the preferred variant for offshore platforms, coastal plants, and paper mills where airborne contaminants are a concern.
• Revision H1BCB Advantage: Newer boot flash supports firmware updates without requiring a PROM burner. Earlier VPRO boards (H0xxx) needed external programming hardware.
• Live Test Verified: Every board undergoes a 48-hour burn-in running actual turbine simulation loops, not just a POST. We log all Ethernet handshakes, VME arbitration cycles, and I/O scan times. Coated boards are visually inspected for complete coverage and absence of bubbles or voids.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and application config before shipment, so you have a fallback if your new board needs the same image.
• Direct Drop-In: Matches existing Mark VIe backplane pinout and VME slot spacing. No mechanical modifications required—your cable harnesses and I/O terminations stay untouched.

Frequently Asked Questions (FAQ)

Q: What is the difference between the IS200VPROH1BCA and the IS200VPROH1BCB?

A: The “B” at the end of the suffix denotes conformal coating. The H1BCA is a standard non-coated board; the H1BCB has an acrylic coating applied to the entire PCB assembly. Electrically and functionally they are identical—same processor, same memory, same firmware. The coating adds protection against humidity, salt spray, and conductive dust. If your existing board is coated, you must replace it with a coated board (BCB) because the uncoated version will fail faster in that environment. Conversely, if your cabinet is in a clean, climate-controlled room, the BCA is sufficient and costs less.

Q: I have an IS200VPROH1BCB with a different suffix letter—can I just swap this in?

A: The “BCB” suffix indicates the hardware revision and coating. If your current board is H1BCB, yes—direct swap. If you have H1B or H1A (non-coated or older coating types), you need to check your Mark VIe Toolkit version first. Newer boards might not boot with firmware older than v5.8. In our experience, always pull a firmware version log from your existing board before swapping. We can guide you through that command-line check.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews try to pull a VPRO while the cabinet was still on auxiliary power—it took out the backplane driver chips. Don’t risk it.

Q: How do I know this isn’t a counterfeit or a refurbished board sold as “new”?

A: We photograph each unit’s OEM packaging, serial number label, and anti-static bag before shipment. You’ll receive those images with your packing slip. Also, our QC process includes a visual inspection against GE’s known PCB marking standards—copper trace thickness, solder mask color, and component date codes. For coated boards, we also check the coating consistency under UV light (acrylic fluoresces). Counterfeits usually have mismatched font styles or uneven coating application. We reject about 12% of inbound stock for that alone.

Q: Will I lose my turbine protection settings when I replace the board?

A: Yes and no. Application logic and setpoints are stored in the application flash and in the separate memory on the I/O boards, not primarily on the VPRO. However, the VPRO does hold the executive firmware and the boot configuration. If your old board is dead and you can’t extract the configuration, we can send you a blank board and you’ll need to reload from your backup file (.hex or .bin). If you don’t have a backup, we can, in some cases, transplant the flash ICs—but that’s a last-resort service, not covered under standard warranty.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours of order placement and payment confirmation. For international orders, add 3–5 days for customs. If you need expedited (overnight air), we can do that, but you’ll need to coordinate with our logistics team for the cut-off time.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS200VPROH1BCB is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220VPRO (with different component ratings and a separate safety watchdog). Mixing them violates your site’s safety integrity level. If you’re in a SIL environment, we can source the correct variant but it will have a different model number and longer lead time.

Q: What’s your return policy if it doesn’t solve my fault code?

A: If the board is electrically functional (passes our QC test) but doesn’t clear your turbine fault, we’ll accept a return within 30 days provided the board is still in anti-static packaging and shows no physical damage. We do charge a 15% restocking fee if the fault was due to your application mismatch (e.g., wrong firmware version). We’ll work with you over the phone or email to diagnose the fault before we ship, so we can avoid that scenario. Our goal is to get you running, not to ship boxes back and forth.

DS200DTBBG1ABB
DS200TCCAG1BAA
DS200TCCAG1BAA
DS200TCCAG1BAA