IS200TSVOH1BCC | New Surplus GE TSVO PCB

Description

Product Introduction (Anti-Template)

The ‘BCC’ suffix on this servo output board adds another component variant to the ‘B’ revision platform—a configuration where GE made specific component selections that may affect output performance or long-term reliability. The IS200TSVOH1BCC is a TSVO series board with the improved drive capability and thermal management of the ‘B’ revision, combined with the ‘CC’ variant-specific component selection.

What does ‘BCC’ mean in practice? The ‘CC’ portion typically indicates component substitutions—often different output drive components, precision resistors, or connectors driven by supply chain changes or customer requirements. The board retains all functional characteristics of the standard TSVOH1B (enhanced drive capability, improved thermal management) but may have slightly different output characteristics, linearity, or load drive capability depending on the substituted parts. If you’re replacing an existing ‘BCC’ board, match the suffix. If you’re substituting a standard ‘B’ for a ‘BCC’, verify the component differences with GE documentation or your OEM.

Key Technical Specifications

Compatible Replacement Models

✅ Drop-in Replacement: IS200TSVOH1B — The standard ‘B’ revision. Identical pinout, mounting, and software interface. The ‘BCC’ uses different component selections. Most applications won’t see a difference.

✅ Drop-in Replacement: IS200TSVOH1A — The ‘A’ revision. Direct hardware match. The ‘B’ revision (including ‘BCC’) has enhanced drive capability and thermal management.

⚠️ Software Compatible: IS200TSVCH1B — Servo board with integrated feedback conditioning. Requires software configuration. Budget 2-4 hours.

⚠️ Software Compatible: IS200TBCI1A — General-purpose analog output board. Requires external servo amplifiers and complete rework. Budget 8-12 hours.

❌ Hardware Incompatible: IS200TBQGH1A — Excitation termination board. Different pinout and application.

Frequently Asked Questions (FAQ)

Q: What does the ‘BCC’ suffix mean on this TSVO board?

A: The ‘BCC’ suffix indicates a component variant within the ‘B’ revision family. It’s not a standard upgrade path—typically, ‘BCC’ means GE used different components (output drivers, precision resistors, or connectors) due to supply chain changes or a customer request. The board functions identically from a wiring perspective.

Q: Can I replace a ‘BCC’ board with a standard ‘B’ revision?

A: Usually yes—the boards are pin-for-pin compatible. However, some ‘BCC’ variants have different output linearity or load drive characteristics. If those differences matter to your servo application, match the suffix.

Q: How do I know if I need the ‘BCC’ variant?

A: Check your original bill of materials or the board’s placement in your system. If the board you’re replacing has a ‘BCC’ suffix, replace it with the same suffix.

Q: Is the TSVOH1BCC hot-swappable?

A: We strongly advise against hot-swapping servo control boards. Power down the cabinet segment before swapping.

Q: What bench testing should I do before installing a TSVOH1BCC?

A: Standard servo output protocol with component verification. First, visual inspection. Second, verify continuity. Third, apply power and verify output signal ranges. Fourth, test with a representative load and verify linearity.

Q: How do I verify I’m getting a genuine TSVOH1BCC?

A: Check component markings against GE’s documented parts list. Weigh the board; should be about 363 grams. Look for the GE holographic security label.

Q: Where do I find the official wiring diagram for the TSVOH1BCC?

A: GE document GEK-130552 covers the TSVO series. The ‘BCC’ suffix typically does not change the wiring diagram. Always cross-reference against your cabinet’s as-built drawings. Verify every channel before terminating.

NI PCI-7813R PLC
ABB DSQC679 3HAC028357-001 PLC
SIEMENS 6SE6440-2UD41-3GB1 PLC