GE IS215VCMIH2CA | VME Power Module | Fast Shipping

Description

Product Introduction

The GE IS215VCMIH2CA is a VMEbus primary power supply module from the Mark VIe Speedtronic series, purpose-built to provide regulated DC power to the Mark VIe control system backplanes. This board converts the plant’s nominal 125 VDC bus (typically from battery-backed DC supplies) into the clean, regulated voltages required by processor boards, I/O modules, communication interfaces, and field devices. The “CA” suffix indicates a conformal coated board with enhanced moisture and contaminant resistance for harsh environments, combined with the maximum performance H2C revision features.

What sets the VCMIH2CA revision apart is its robust input filtering, wide input voltage tolerance (100–150 VDC), efficient operation (93% typical), advanced diagnostics including voltage monitoring, current monitoring, temperature sensing, and predictive health monitoring, and the acrylic conformal coating that protects power electronics from humidity, salt spray, and airborne particulates. The board delivers 5 VDC at up to 32 A for logic circuits, ±12 VDC at 4.5 A for auxiliary circuits, and 24 VDC at 5.5 A for field I/O—all with ultra-low ripple for stable operation. For system integrators requiring maximum capacity, high-performance primary power with advanced diagnostics and environmental protection in demanding installations, this board represents the ultimate OEM power solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Conformal Coated for Harsh Environments: The “CA” suffix provides acrylic coating that protects power electronics against humidity, salt spray, and airborne contaminants—ideal for offshore platforms, coastal plants, and high-humidity installations.
• Maximum Current Capacity: 32 A on 5 V rail—supports the most heavily loaded backplanes.
• Highest Efficiency: 93% efficiency—lowest heat generation in the series.
• Multiple Output Rails: 5 V, ±12 V, and 24 V outputs—supplies all backplane power requirements.
• Ultra-Low Ripple: <20 mV peak-to-peak—ensures stable operation of sensitive electronics.
• Enhanced Transient Protection: 2,000 V surge withstand—superior protection from plant electrical disturbances.
• Advanced Diagnostics: Voltage, current, temperature, and health monitoring with predictive indicators.
• Predictive Health Monitoring: Capacitor aging estimation and fan health monitoring.
• Live Test Verified: Every board undergoes a 48-hour burn-in at full rated load with cycling input voltage. We log output voltages, ripple, thermal performance, and diagnostic thresholds. Coated boards are visually inspected for complete coverage and absence of bubbles.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels.
• Pre-Shipment Capacitor Reform: For units stored more than 12 months, we perform controlled capacitor reforming to prevent inrush failures.

Frequently Asked Questions (FAQ)

Q: What does the “CA” suffix mean on IS215VCMIH2CA?

A: The “CA” indicates conformal coating combined with the H2C maximum performance revision. Specifically, it means the board has an acrylic conformal coating (0.02–0.05 mm) applied to the entire PCB assembly for moisture and contaminant protection, along with all H2C features (32 A capacity, 93% efficiency, predictive health monitoring). The coating adds protection; the H2C features provide maximum power capability.

Q: What is the difference between IS215VCMIH2C and IS215VCMIH2CA?

A: The H2C is non-coated; the H2CA has conformal coating. The coating protects against humidity, salt fog, and chemical vapors. If your cabinet is in a coastal area, offshore platform, or high-humidity environment, the CA variant is strongly recommended. In a clean, climate-controlled room, the H2C is sufficient and costs less. If your existing board is coated, you must replace it with a coated board (CA) because the uncoated version will fail faster in that environment.

Q: Does the conformal coating affect power delivery, efficiency, or diagnostics?

A: No. The coating is applied after functional testing, so it does not affect the electrical characteristics. Power delivery, efficiency, ripple, and diagnostic performance are identical to the non-coated H2C. The coating only provides environmental protection.

Q: What is the predictive health monitoring feature?

A: The VCMIH2CA continuously monitors capacitor aging, fan health, and overall power supply health. It estimates remaining component life based on temperature and operating hours, enabling proactive maintenance planning.

Q: What is the benefit of the 93% efficiency?

A: At 93% efficiency, the VCMIH2CA generates approximately 42 W of heat at full load vs. 45 W at 92% and 50 W at 91%. This difference is significant in tightly packed cabinets and can extend the life of all components in the system.

Q: What is the benefit of the 2,000 V transient protection?

A: The 2,000 V surge withstand provides superior protection from voltage spikes caused by lightning strikes, switching transients, or other plant electrical disturbances.

Q: Can I use this board with 24 VDC or 48 VDC input instead of 125 VDC?

A: No. The VCMIH2CA is specifically designed for 125 VDC nominal input (100–150 VDC range). Using lower or higher voltages will damage the board or fail to regulate properly.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion of power boards. You must de-energize the rack and discharge capacitors before removal.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs.

Q: Does this board work with both Mark VIe and Mark VIeS (SIL-rated) cabinets?

A: Yes—with a caveat. SIL systems typically require redundant power supplies. The H2CA can be used in those configurations, but ensure your backplane supports OR-ing diodes. We can help verify compatibility.

Q: What’s your return policy if this doesn’t fix my power-related fault?

A: If the board passes our QC test but doesn’t clear your fault, accept a return within 30 days provided no physical damage or overvoltage stress. We charge a 15% restocking fee if the fault was due to downstream short circuits or incorrect input voltage. We’ll diagnose with you before shipping.

THERMOCOUPLE CARD
IS200 VTCCH1CBB MARK VI THERMOCOUPLE CARD
IS200 VTURH MARK VI CARD