GE IS215AEPCH2FB | VME Power Module | Fast Shipping

Description

Product Introduction

The GE IS215AEPCH2FB is a VMEbus auxiliary power supply module from the Mark VIe Speedtronic series, purpose-built to provide regulated DC power to specific sections of the Mark VIe control system backplanes and field devices. This board converts the plant’s nominal 125 VDC bus into clean, regulated voltages for auxiliary circuits, analog I/O, and field loops. The “FB” suffix indicates a heavy conformal coated board with enhanced moisture, chemical, and contaminant resistance for harsh environments, combined with the enhanced H2 revision features.

What sets the AEPCH2FB revision apart is its robust input filtering, wide input voltage tolerance (100–150 VDC), enhanced diagnostics including voltage monitoring, current monitoring, temperature sensing, and predictive health monitoring, improved efficiency (90% typical), higher current capacity, and the thicker urethane or acrylic conformal coating that provides superior protection in harsh environments. The board delivers 5 VDC at 20 A for auxiliary logic, ±15 VDC at 2.5 A for analog circuits, and 24 VDC at 4 A for field loops—all with low ripple for stable operation. For system integrators requiring higher capacity auxiliary power with enhanced diagnostics and heavy environmental protection in aggressive installations, this board is the direct OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Heavy Conformal Coating for Extreme Environments: The “FB” suffix provides a thicker, more robust coating (0.05–0.13 mm) that protects power electronics against high humidity, salt fog, and chemical exposure. This is the preferred variant for offshore platforms, coastal installations, and chemical processing facilities.
• Enhanced Current Capacity: Higher 5 V current (20 A vs. 15 A), higher auxiliary currents—supports more heavily loaded systems.
• Improved Efficiency: 90% efficiency—less heat generation than earlier variants.
• Predictive Health Monitoring: Capacitor aging estimation enables proactive maintenance planning.
• Multiple Output Rails: 5 V, ±15 V, and 24 V outputs—supplies auxiliary, analog, and field power from a single module.
• ±15 V for Analog Circuits: Dedicated rails for precision analog I/O—ensures stable, low-noise operation.
• Wide Input Range: Accepts 100–150 VDC, covering typical plant battery voltages and fluctuations.
• Comprehensive Diagnostics: Voltage, current, temperature, and health monitoring.
• Comprehensive Protection: Foldback current limiting, overvoltage clamping, and thermal shutdown.
• Live Test Verified: Every board undergoes a 48-hour burn-in at full rated load with cycling input voltage. We log output voltages, ripple, thermal performance, and diagnostic thresholds. Coated boards are visually inspected for complete coverage, thickness consistency, and absence of bubbles, voids, or pinholes.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels.
• Pre-Shipment Capacitor Reform: For units stored more than 12 months, we perform controlled capacitor reforming to prevent inrush failures.

Frequently Asked Questions (FAQ)

Q: What does the “FB” suffix mean on IS215AEPCH2FB?

A: The “FB” indicates heavy conformal coating combined with the H2 revision. Specifically, it means the board has a thicker urethane or acrylic conformal coating (0.05–0.13 mm) applied to the entire PCB assembly for maximum moisture, chemical, and contaminant protection, along with all H2 features (20 A 5 V rail, ±15 V @ 2.5 A, 90% efficiency, predictive health monitoring). The coating adds protection; the H2 features provide enhanced performance and diagnostic capability.

Q: What is the difference between IS215AEPCH2FB and IS215AEPCH1FA?

A: The H2FB is a significant upgrade: higher 5 V current (20 A vs. 15 A), higher auxiliary currents (2.5 A vs. 2 A, 4 A vs. 3 A), higher efficiency (90% vs. 89%), lower ripple (<40 mV vs. <50 mV), and predictive health monitoring. The H2FB also requires Mark VIe Toolkit v6.5 or higher vs. v6.0 for H1FA. If you need higher capacity and enhanced diagnostics with heavy coating, choose H2FB.

Q: What is the ±15 V output used for?

A: The ±15 V output is specifically for powering precision analog circuits such as analog input boards (e.g., ACL, ACLE, ACLI) and analog output boards. These rails provide clean, regulated power for high-accuracy analog measurement and control. If your system includes these analog boards, you need ±15 V power.

Q: What is the predictive health monitoring feature?

A: The AEPCH2FB continuously monitors capacitor aging and estimates remaining capacitor life based on temperature and operating hours. This enables proactive maintenance planning—you can replace the power supply during scheduled maintenance rather than reacting to unexpected failure. The health status is reported through the Mark VIe Toolkit.

Q: Does the heavy coating affect power delivery, efficiency, or protection?

A: Good question. The coating adds about 0.1 mm to the board thickness, which does not affect VME slot fitment—clearances are designed for it. Power delivery, efficiency, ripple, and protection thresholds are identical to the non-coated H2. The coating only provides environmental protection. Do not remove the coating or scrape it off—it voids the warranty and compromises protection.

Q: Can I use this board with both Mark VIe and Mark VIeS (SIL-rated) cabinets?

A: Yes—with a caveat. SIL systems typically require redundant power supplies. The AEPCH2FB can be used in those configurations, but ensure your backplane supports OR-ing diodes. We can help verify compatibility.

Q: Is this board hot-swappable?

A: No. The Mark VIe backplane does not support live insertion. You must de-energize the rack, wait for LEDs to extinguish, and discharge capacitors. We’ve seen technicians try to pull an AEPC with the rack still powered—it arced and damaged neighboring boards.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS215AEPCH2FB is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220AEPC (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t fix my power-related fault?

A: If the board passes our QC test but doesn’t clear your fault, accept a return within 30 days provided no physical damage or overvoltage stress. We charge a 15% restocking fee if the fault was due to downstream short circuits or incorrect input voltage. We’ll diagnose with you before shipping.

IS200 JPDDG DC PDM
IS200 JPDDG1A DC PDM
IS200 JPDLG
IS200 JPDLG1A