GE IS200HSLAH2ADE | Mark VI High Speed I/O | New Surplus

Description

Product Introduction

This IS200HSLAH2ADE is a factory-sealed High-Speed I/O interface board from GE’s legacy Mark VI turbine control platform. It is the extended-duty variant of the HSLAH2A, purpose-built for harsh electrical environments and wider temperature swings. The “DE” suffix denotes two critical upgrades: enhanced input transient protection (surge suppression on every channel) and a wider operating temperature range compared to the standard board.

The “D” in “DE” indicates the enhanced input protection—this board includes additional transient voltage suppression and input filtering to protect against voltage spikes, surges, and electrical noise that would damage standard HSLAH boards. This is critical in installations with long field wiring runs, frequent lightning activity, or heavy industrial electrical noise from VFDs and switchgear. The “E” indicates the extended temperature rating, allowing operation in environments where the standard board would thermally derate or fail. If your standard HSLAH boards have been failing due to input surges or high ambient temperatures, this board is the solution.

Key Technical Specifications

Key Selling Points & Differentiators

• Enhanced Transient Protection – ±60V Surge Suppression: The “D” in DE adds TVS diodes on every input channel, protecting the board from voltage spikes, lightning-induced surges, and switching transients. Standard HSLAH boards do not have this protection and can be damaged by a single surge event. This board survives events that would destroy the standard version.
• Extended Temperature Range (−20°C to +65°C): The “E” in DE extends the operating range significantly—from the standard 0 to +55°C to −20°C to +65°C. This allows the board to operate reliably in unheated control rooms, outdoor enclosures, or high-ambient-temperature environments.
• Interrupt-Driven Architecture with Enhanced Reliability: Same <1 ms deterministic response as the standard H2A, but with additional filtering to prevent false interrupts from electrical noise. This is critical for safety systems in high-noise environments.
• Direct Drop-In Replacement for HSLAH2A, H1A, and H1B: Same VME form factor, same backplane connector, same pinouts. The enhanced protection and temperature rating are transparent to the CPU. No configuration changes required.
• 100% Live-Tested with Surge Simulation: Every H2ADE board runs our full HSIO test sequence plus a surge immunity test—we inject ±60V transients on every input channel while monitoring for false interrupts or missed states. We also run the board through a −20°C to +65°C temperature cycle with continuous interrupt generation. If it survives our stress test, it will handle your site conditions.

Frequently Asked Questions (FAQ)

Q: What does the “DE” suffix mean on this HSLAH board?

A: “D” indicates enhanced input transient protection—TVS diodes on every channel to suppress voltage spikes and surges. “E” indicates extended temperature range (−20°C to +65°C vs. standard 0 to +55°C). This is the ruggedized version of the HSLAH2A, designed for harsh environments with electrical noise and temperature extremes.

Q: What’s the difference between this H2ADE and the standard H2A board?

A: The H2A has basic opto-isolation but no surge suppression and standard temperature rating. The H2ADE adds: (1) ±60V TVS surge suppression on every input channel, (2) extended operating temperature down to −20°C and up to +65°C, and (3) additional input filtering to prevent false interrupts from electrical noise. The H2ADE is significantly more robust.

Q: I’ve had multiple HSLAH boards fail due to lightning surges. Will this board fix that?

A: Yes—this board is specifically designed for that scenario. The “D” in DE adds TVS diodes on every input channel that clamp voltage spikes to safe levels, protecting the sensitive opto-isolators and logic devices. We’ve had customers in lightning-prone regions switch to this board and eliminate surge-related failures. It won’t protect against a direct lightning strike, but it will handle induced surges from nearby strikes.

Q: My control room gets hot in summer—sometimes over 55°C. Will this board work?

A: Yes—the extended temperature rating of −20°C to +65°C means this board will operate reliably at temperatures that would cause the standard board to fail or derate. We’ve seen standard HSLAH boards thermally fail above 60°C; this board is designed to handle 65°C with margin.

Q: Will this board work in a Mark VIe system?

A: No. Mark VIe uses a different backplane architecture and I/O structure. This board is VME-based and will not physically fit in a Mark VIe rack. If you’re on Mark VIe, you need the corresponding extended-duty HSIO board for that platform.

Q: Is this board a direct replacement for my existing HSLAH1A or H2A?

A: Yes—the H2ADE is a direct drop-in replacement. Same VME form factor, same backplane connector, same pinouts. The enhanced protection and temperature rating are transparent to the CPU. No changes to ToolboxST configuration are required. We’ve replaced dozens of standard boards with H2ADE boards with zero configuration issues.

Q: How do you test the surge protection on this board?

A: We use a surge generator calibrated to IEC 61000-4-5, injecting ±60V transients with 1.2/50 µs waveform onto every input channel. The board is powered and actively scanning inputs during the test. We verify that the board does not: (1) report false states, (2) generate false interrupts, or (3) suffer any damage after 100 surge pulses per channel. We also run a functional test before and after the surge test to confirm no degradation. The H2ADE has a 99% pass rate on this test—the standard H2A would fail catastrophically.

Q: Does this board have non-volatile configuration memory?

A: No—the board’s configuration is loaded from the Mark VI CPU during boot. The only settings that persist are hardware jumper or DIP switch settings (if any). No backup is required when replacing the board.

Q: What’s the warranty on this extended-duty board?

A: 12 months replacement warranty from ship date. These boards are obsolete and no longer manufactured. If it fails under normal operating conditions (temperature within −20°C to +65°C, voltage within spec) during the warranty period, we replace it from our remaining stock or issue a full refund. No restocking fees.

Q: How many H2ADE boards do you have? Should I buy spares?

A: This is the rarest HSLAH variant. We have fewer than 10 units remaining in our inventory. This extended-duty configuration was never produced in high volume—it was a special-order board for harsh environments. If your facility has had surge or temperature-related failures on standard HSLAH boards, this is the solution, but availability is extremely limited. We strongly recommend buying a spare. When these are gone, there is no known alternative source. Volume discounts are available for multiple units.

Q: I see you offer extended testing. What does that include?

A: For the H2ADE, we run the full standard HSIO test (VME handshake, interrupt verification, channel I/O at max speed, 4-hour thermal soak at 55°C) plus: (1) 24-hour thermal cycle from −20°C to +65°C with continuous interrupt generation, (2) surge immunity test with ±60V pulses on every channel, and (3) conducted EMI test with noise injection on the field wiring. We include the full test log with every shipment—this is the most thoroughly tested board in our HSLAH inventory.

Q: Can this board be used for flame detection signals in high-noise environments?

A: Yes—the enhanced input filtering on the H2ADE makes it ideal for flame detection in high-EMI environments. The additional filtering prevents false flame-on/flame-off signals from electrical noise, while the surge protection guards against transients from nearby ignition systems or switchgear. This is a common application for this board in our experience.

Q: What’s the maximum frequency this board can measure with the extended filtering?

A: The enhanced input filtering slightly reduces the maximum measurable frequency—approximately 8 kHz vs. the standard H2A’s 10 kHz. For most turbine speed sensors (typically 1–5 kHz range), this is not an issue. If you need higher frequencies, we can discuss adjusting the filter configuration or recommend alternative hardware. Contact us with your requirements.

140CP167160 SCHNEISER
SCHNEISER 140XBP00600
140XTS00200 SCHNEISER
140N0E77101 SCHNEISER