DS3815PRDB | GE Mark VI IS200 Power Supply Module In Stock

Description

Product Introduction

The GE DS3815PRDB is a premium wide-range power supply module for the Mark VI Speedtronic turbine control rack, configured with auto-ranging AC input (120-240 VAC) OR DC input (125 VDC), extended temperature rating, enhanced output filtering, ruggedized vibration-resistant construction, and the premium D revision component selection. This IS200-series PSU converts either standard AC line voltage or DC battery bus power into the regulated DC voltages required by the CPU, I/O boards, and backplane. It combines the flexibility of the PRBA variant with extended temperature capability, enhanced filtering, and premium component quality.

The DS3815PRDB provides three output rails: 48 VDC for the CPU bus, 24 VDC for field device loop power, and 5 VDC for logic-level circuits. Total output capacity is 250W with ripple reduced to <20 mV on the 5V rail. The R in the suffix indicates wide-range AC/DC input capability. The D indicates a premium revision with extended temperature rating, enhanced filtering, and selected high-reliability components. This is the premium flexible-input PSU for the most demanding applications—offshore platforms, critical power generation, and plants with mixed AC/DC power distribution. The module includes the same backplane-specific connector as all Mark VI power supplies, sliding directly into the rack and communicating status (voltage good, overcurrent, overtemperature) to the CPU via discrete signals.

Key Technical Specifications

Key Selling Points & Differentiators

• Wide-Range AC/DC Input: Accepts 120-240 VAC auto-ranging OR 125 VDC input—the ultimate flexible PSU. Reduces spares inventory by using one part number for both AC and DC applications. Ideal for plants with mixed power distribution or panel upgrades.
• Enhanced Output Filtering: <20 mV ripple on the 5V rail and <50 mV on 24V/48V rails. Protects sensitive analog measurements from power supply noise.
• Extended Temperature Range: Rated for -40 to +75°C ambient—5°C higher than standard PRBA variants. Uses 105°C-rated capacitors and higher-grade semiconductors.
• Vibration-Resistant Construction: Large components secured with industrial adhesive. Reinforced solder joints on critical connections. Designed for turbine decks and compressor stations.
• Premium D Revision Components: Selected components with extended MTBF ratings, tighter tolerances, and improved thermal management.
• Full 250W Capacity: Sufficient for heavily populated 15-slot racks with multiple I/O modules.
• Full Load Bank Test at Elevated Temperature: Every unit runs on our test rig at +75°C ambient for 24 hours, pulling full 250W load. We measure output ripple, verify hold-up time, and inspect component security. Capacitors replaced on units manufactured before 2015.
• Surplus/Refurbished with 1-Year Warranty: New surplus (original GE packaging) or professionally refurbished. 1-year warranty, 30-day return.

Frequently Asked Questions (FAQ)

Q: What’s the difference between DS3815PRBA and DS3815PRDB?

Temperature rating, filtering, and component quality. The PRBA has standard temperature (-40 to +70°C), standard filtering (<50 mV on 5V), and standard components. The PRDB has extended temperature (-40 to +75°C), enhanced filtering (<20 mV on 5V), and premium D revision components. Both have wide-range AC/DC input and vibration-resistant construction. The PRDB is the premium version—it combines flexible input with high-temperature capability, ultra-low ripple, and selected components.

Q: What’s the difference between DS3815PRDB and DS3815PFZC?

Input flexibility and AC range. The PRDB accepts 120-240 VAC auto-ranging (90-264 VAC) OR 125 VDC, with extended temperature and enhanced filtering. The PFZC accepts 240 VAC only (180-264 VAC) with MIL-spec coating, enhanced filtering, and extended temperature. The PRDB is more flexible (wider AC range + DC input) but lacks MIL-spec coating. Choose PRDB for maximum input flexibility. Choose PFZC for corrosive environments with AC-only power.

Q: What’s the difference between DS3815PRDB and DS3815PLNI?

Input flexibility. The PRDB accepts 120-240 VAC auto-ranging OR 125 VDC with extended temperature and enhanced filtering. The PLNI accepts 125 VDC only with extended temperature, enhanced filtering, and premium N/I components. Both are premium PSUs. The PRDB adds AC input flexibility. The PLNI has higher-grade components for DC-only applications.

Q: Can I connect both AC and DC to this PSU simultaneously?

No—never connect both AC and DC inputs at the same time. The PRDB has separate terminal blocks for AC (L/N/G) and DC (+/-/G). Connect one or the other, not both. Connecting both simultaneously will damage the input circuit. Double-check your wiring.

Q: What’s the auto-ranging AC input range?

The PRDB automatically accepts 90-264 VAC, 47-63 Hz. That covers 120 VAC (North America), 220-240 VAC (Europe, Asia), and everything in between. No jumper or switch changes required—significant advantage over narrower-range variants.

Q: What’s the DC input range for this PSU?

The DC input accepts 90-150 VDC, covering the standard 125 VDC turbine battery bus. Do not connect 48 VDC to the DC input terminals—it’s below the minimum.

Q: Can I use this PSU to power a full 15-slot Mark VI rack?

Yes—the PRDB delivers 250W total, sufficient for a fully populated rack in most configurations. At temperatures above 65°C, derating applies. At 75°C, you lose approximately 25% of capacity—down to about 187W. Calculate your actual load and cabinet temperature.

Q: Can I run two PRDB units in redundant configuration?

Yes—the PRDB supports active current sharing for N+1 redundancy. Two units in parallel will each run at approximately 50% load. Both units must be fed from the same input source type (both AC or both DC) to maintain proper current sharing. We can supply matched pairs tested for current sharing.

Q: What are the status LED patterns indicating?

Three LEDs on the front panel: DC OK (green), Overload (yellow), Overtemperature (red). Normal: green steady, yellow off, red off. If yellow is steady, you’re in current limit. If red is on, the PSU is overtemperature—check cabinet ventilation.

Q: Is there a fuse on this board that I can replace in the field?

No user-replaceable fuse. The PRDB uses solid-state current limiting. If the PSU doesn’t power up, it’s likely a wiring issue or internal failure. Do not open the casing. Send it to us for evaluation.

Q: Can I use a standard DIN-rail power supply instead of this board?

No. The DS3815PRDB is a backplane-specific module with proprietary connector and output ramp timing. A DIN-rail supply won’t match the timing or fit the rack. Stick with the original board.

Q: I have a critical turbine with mixed AC and DC panels. Should I choose PRDB?

Yes—the PRDB is the ideal choice for mixed power distribution. You can use the same spare part for both your AC and DC panels. The extended temperature, enhanced filtering, and vibration-resistant construction make it suitable for demanding turbine environments. The premium D revision components provide maximum reliability. This reduces spares inventory and simplifies maintenance across multiple panels.

Q: Is the PRDB compatible with standard Mark VI racks?

Yes—it fits the same IS200 backplane slot as all other DS3815 PSU variants. Direct swap for any other DS3815 PSU—same dimensions, same connector, same terminal layout. No software changes required.

Q: What’s the input configuration for AC and DC?

AC: connect Line to “L”, Neutral to “N”, Ground to “GND”. DC: connect positive to “+”, negative to “−”, Ground to “GND”. The terminals are clearly labeled on the front panel. Do not confuse the AC and DC terminal blocks—they are physically separate.

A-B 1756-L72
ALLEN BRADLEY 80026-173-23-R MOX12-P3509
GE SR469-P5-HI-A20-E