DS3800NHVE1B1A | GE Speedtronic High-Voltage Encoder Interface

Description

Product Introduction

The DS3800NHVE1B1A is an enhanced version of the high-voltage encoder interface board—the NHVE with extended temperature range and improved diagnostics. The suffix tells the story: the first “1” indicates a hardware revision with improved signal conditioning and isolation. The “B” specifies extended temperature range components. The second “1” adds enhanced diagnostic features (configuration verification, signal quality monitoring). The final “A” is the standard environmental package (no conformal coating). This board was designed for installations where better diagnostic feedback and extended temperature range were needed for high-voltage encoder applications.

The extended temperature range means the board can operate in uninsulated shelters or outdoor cabinets. The enhanced diagnostics verify the board’s configuration and provide detailed status reporting on the encoder signals. Compare this to the base DS3800NHVE (standard temperature range, basic diagnostics). The 1B1A gives you the same basic functionality with better diagnostic feedback and extended temperature tolerance.

Key Technical Specifications

Compatible Replacement Models

Frequently Asked Questions (FAQ)

What’s the difference between the NHVE1B1A and the base NHVE?
The 1B1A adds enhanced diagnostics (configuration verification, signal quality monitoring) and extended temperature range (-40°C to +70°C vs 0 to 60°C). The base NHVE has basic link status and standard temperature range only.

What’s the “Signal Quality” LED?
The Signal Quality LED indicates the integrity of the incoming encoder signals. The board monitors the signal amplitude and noise levels. Green means good. Amber means marginal. Red means poor—check the encoder or cabling.

Do I need to upgrade my DMP firmware for the enhanced diagnostics?
The enhanced diagnostics require DMP firmware v3.0 or later. Older firmware won’t recognize the diagnostic registers. We can provide the firmware EPROMs if you need them.

Does this board have conformal coating?
No, the final “A” indicates no conformal coating. This is a bare board. If you need conformal coating for humidity protection, look for the NHVE1B1B or NHVE1B1C variants.

What’s the voltage rating of this board?
The voltage rating depends on the specific configuration. Check the board’s label or your system documentation for the exact voltage rating.

Can I hot-swap this board?
No. Mark IV backplanes are not hot-swappable. Power down the cabinet, lock out the breaker, and wait 60 seconds before removing or installing the board.

What’s your warranty and lead time?
We stock the NHVE1B1A in limited quantities. Lead time is 1-2 business days. We offer a 1-year warranty. We test every board with a 24-hour burn-in and a diagnostic verification. The test report is included.

Is this board compatible with the Mark VIe?
No. This board is for Mark IV systems only. The backplane architecture is different.

AB 1756-L73
rexroth VT-HNC100-1-23/W-08-P-0
ABB CS513K01 3BSE004772R1