DS3800NFIA1B1B | Replacement for DS3800NFIA

Description

Product Introduction

The DS3800NFIA1B1B is an enhanced version of the fiber optic adapter interface board—the NFIA with improved diagnostics, extended temperature range, and environmental protection. The suffix tells the story: the first “1” indicates a hardware revision with improved signal conditioning. The “B” specifies extended temperature range components. The second “1” adds enhanced diagnostic features (link quality monitoring, signal integrity reporting). The final “B” is the conformal coating. This board was designed for installations where the standard NFIA wasn’t sufficient—harsh environments requiring extended temperature range and conformal coating, or installations needing better diagnostic feedback.

The board plugs into the Mark IV backplane and provides termination and signal conditioning for fiber optic links. The enhanced diagnostics provide status reporting beyond the basic NFIA. Compare this to the DS3800NFIA (base adapter board, standard temperature range, no coating). The 1B1B gives you the same basic functionality with extended temperature range, conformal coating, and better diagnostics.

Key Technical Specifications

Compatible Replacement Models

Frequently Asked Questions (FAQ)

What’s the difference between the NFIA1B1B and the base NFIA?
The 1B1B adds enhanced diagnostics (link quality monitoring, signal integrity reporting), extended temperature range (-20°C to +65°C versus 0 to 60°C), and conformal coating. The base NFIA has basic link status only. If you need diagnostic feedback or are operating in a harsh environment, choose the 1B1B.

What’s the “Signal Quality” LED?
The Signal Quality LED indicates the integrity of the fiber optic signal passing through the adapter. The board monitors the signal-to-noise ratio and the amplitude of the incoming optical signal. If the signal quality is good, the LED is green. If it’s marginal, it turns amber. If it’s poor, it turns red. This gives you early warning of degrading fiber or connectors.

Do I need to upgrade my DMP firmware for the enhanced diagnostics?
The enhanced diagnostics require DMP firmware v3.5 or later. If you’re running an older firmware version, the board will still work, but the diagnostic features won’t be available. We can provide the firmware EPROMs for the upgrade if needed.

What’s the difference between the NFIA1B1B and the NFCF?
The NFIA is an adapter/interface board—it provides termination and signal conditioning, but relies on other boards for the full communication function. The NFCF is a complete single-channel fiber optic communications board with its own transceivers and protocol handling. They serve different purposes.

Can I hot-swap this board?
No. Mark IV backplanes are not hot-swappable. Power down the cabinet, lock out the breaker, and wait 60 seconds before removing or installing the board.

What’s the most common failure mode on the NFIA1B1B?
We’ve serviced about a dozen of these boards. The most common failure is the signal conditioning circuitry—it can degrade over time, causing intermittent link errors. The enhanced diagnostics will typically give you advance warning. The board is repairable.

What’s your warranty and lead time?
We stock the NFIA1B1B in limited quantities. Lead time is 1-2 business days. We offer a 1-year warranty. We test every board with a 24-hour burn-in and a diagnostic verification. The test report is included.

Is this board compatible with the Mark VIe?
No. This board is for Mark IV systems only. The backplane architecture is different.

Cutler Hammer 1785K PMPP-1700
ABB LDGRB-01
WOODHEAD 5136-RE2-PCI
EMERSON VE3007