DS200TCQAG1ADE | GE Mark VI I/O Board

Description

Product Introduction (Anti-Template)

The DS200TCQAG1ADE is a specialized board that combines both inputs and outputs on a single board, giving you 8 discrete inputs and 8 discrete outputs in one VME slot, with reinforced isolation (1800Vrms) and extended temperature operation (-20°C to +65°C)—a unique combination that saves rack space while providing the robustness needed for demanding applications.

The ‘TCQA’ in the part number indicates this is a discrete input board (the ‘G’ variant includes outputs). The ‘ADE’ suffix tells you this is the enhanced version: reinforced isolation (1800Vrms), extended temperature components (-20°C to +65°C), diagnostic LEDs per channel, 5ms update rate, and improved noise filtering. The board is designed for applications where you have a small number of discrete devices in close proximity, but in harsh environments where standard isolation and temperature range aren’t sufficient.

Key Technical Specifications

Compatible Replacement Models

Replacement options depend on your isolation and temperature requirements.

✅ Drop-in Replacement: The DS200TCQAG1A (no ‘DE’) is a direct electrical drop-in—same pinout, same 8 inputs, same 8 outputs, same relay outputs, same update rate, same diagnostics. The differences: the ‘A’ has standard isolation (1500Vrms), standard temperature range (0-55°C), and standard noise filtering. If your environment is benign and your isolation requirements are standard, the ‘A’ is a cheaper option (typically 15-20% less). The ‘ADE’ is for harsh environments requiring reinforced isolation.

✅ Drop-in Replacement: The DS200TCQAG1 (base model) is a significant downgrade—only use if you’re in a pinch.

⚠️ Software Compatible: The DS200TCQAF1B (16 inputs only) provides inputs only—no outputs. Only use if you don’t need outputs.

⚠️ Software Compatible: The DS200TCQBF1B (16 outputs only) provides outputs only—no inputs.

❌ Hardware Incompatible: Any analog I/O board (TCCAG1 series) uses different backplane pins and is not suitable for discrete signals.

Frequently Asked Questions (FAQ)

What does the ‘ADE’ suffix mean on this discrete I/O board?

GE’s suffix coding for the TCQAG1ADE: the ‘A’ is the base platform (discrete I/O, 8 inputs, 8 outputs, 5ms update). The ‘D’ indicates reinforced isolation (1800Vrms) and extended temperature components (-20°C to +65°C). The ‘E’ is the production revision with improved noise filtering and diagnostic enhancements. So ‘ADE’ is the most robust version of the TCQAG1 platform.

What’s the difference between standard and reinforced isolation?

The TCQAG1A has standard isolation: 1500Vrms between channels and the backplane. The ‘ADE’ has reinforced isolation: 1800Vrms, providing double the safety margin and meeting IEC 61010-1 reinforced insulation requirements. The reinforced isolation uses larger transformers with greater creepage distances and is more resistant to high common-mode voltages and transients.

What type of outputs does this board have?

The TCQAG1ADE has relay outputs (Form C contacts). Each output has a normally open (NO) and normally closed (NC) contact, rated for 5A at 250VAC or 5A at 30VDC. The reinforced isolation extends to the relay outputs, providing better isolation between the field wiring and the backplane.

Can I use this board with a Mark VIe controller?

No—the TCQAG1ADE uses the older Mark VI backplane pinout. Mark VIe uses a different assignment and typically uses the IS200TCQAG1ADE for discrete I/O. Use the Mark VIe-specific board for new installations.

How do I test this board before installation?

Testing the TCQAG1ADE requires checking both inputs and outputs and verifying reinforced isolation:

1. Visual inspection: Check for burnt components. Look for diagnostic LEDs, relay wear, and larger isolation transformers.
2. Power-up test: Apply power. All diagnostic LEDs should briefly flash during POST.
3. Firmware check: Read firmware via ToolboxST—should be 3.5 or later.
4. Input test: Apply 24V DC to input 1—LED should illuminate green. Remove voltage—LED should turn amber (OFF). Repeat for inputs 1-8.
5. Output test: Command output 1 ON—verify relay closes and LED illuminates green. Command OFF—verify relay opens and LED turns amber.
6. Voltage range test: Verify each input’s threshold is within spec.
7. Update rate test: Verify the board updates at 5ms intervals.
8. Isolation test: Apply 1800Vrms between an input channel and ground for 1 minute. (Specialized equipment required.)
9. Temperature test: If you have a temperature chamber, cycle the board from -20°C to +65°C and verify operation.

What’s the most common failure on this board?

Two issues specific to the discrete I/O design:

1. Relay contact wear. The relay contacts can wear out over time, especially if switching inductive loads. Symptom: output doesn’t close or exhibits high contact resistance.
2. Diagnostic LED failure. The LEDs can fail after 10+ years—a failed LED doesn’t affect the input, but you lose visual indication.

If I’m using this board in a SIL-rated safety application, what’s the recommended maintenance interval?

The combined I/O, relay outputs, and reinforced isolation make this board suitable for SIL-1 and SIL-2 applications (not SIL-3). We recommend:

• Visual inspection: Every 6 months (check diagnostic LEDs and relay contacts)
• Power-up test: Every 12 months
• Input test: Every 12 months
• Output test: Every 12 months (verify relay operation)
• Isolation check: Every 2 years
• Full calibration: Every 5 years

What’s the lead time for a replacement TCQAG1ADE?

These boards are less common than standard versions:

• New surplus: 4-8 weeks. The ‘ADE’ commands a premium—expect 20-30% above the TCQAG1A.
• Refurbished: 2-4 weeks. Ensure the refurbisher tests the reinforced isolation.
• Used/as-is: High risk—the relays are wear items.

Is there a direct Mark VIe equivalent?

Yes—the IS200TCQAG1ADE (Mark VIe version). The backplane pinout is different.

What termination board should I use with the TCQAG1ADE?

The TCQAG1ADE is designed to interface with a termination board that supports both discrete inputs and outputs. The DS200TBPXG1A (mixed-signal termination) or DS200TBAAG1A (discrete input termination) can be used for the inputs, but for the outputs you need a termination board with relay output terminals. For best results with reinforced isolation, use the appropriate termination board and follow the grounding instructions in the GE manual.

What’s the update rate for this board?

The TCQAG1ADE updates all 16 channels simultaneously at 5ms intervals—200Hz update rate.

What’s the maximum load for the relay outputs?

The relay outputs are rated for 5A at 250VAC or 5A at 30VDC. For inductive loads (solenoids, contactors), derate to 2A or use an external snubber circuit to protect the relay contacts. The reinforced isolation on the ‘ADE’ version extends to the relay outputs, providing better isolation between the field wiring and the backplane.

7ML52020EA0 ABB
FOXBORO PO700SE
FOXBORO P0700SC