DS200SLCCG4A | GE DS200 4-Port Fieldbus Gateway In Stock

Description

Product Core Brief

• Model: DS200SLCCG4A
• Brand: General Electric (GE)
• Series: Mark V DS200
• Core Function: Quad independent fieldbus gateway
• Product Type: Quad Fieldbus Link (4 ports, fully independent)
• Key Specs: 4 independent processors | All protocols | 1024 bytes I/O each | 1 ms scan | 2500 VAC isolation
• Condition: New Original.

Product Introduction

The DS200SLCCG4A is a quad independent fieldbus link controller for GE’s Mark V DS200 series, used in Speedtronic turbine control systems. It provides four completely separate fieldbus interfaces on a single board—the highest channel count fieldbus gateway in the Mark V family.

The “4A” designation indicates a quad independent gateway. Four independent 32-bit processors (300 MHz each), 1024 bytes I/O capacity per port, 1 ms scan rate, and 2500 VAC isolation between all ports and backplane. Use it for the most complex integration projects: connect a Mark V turbine to four different networks simultaneously (e.g., Profinet, EtherNet/IP, Modbus TCP, and DeviceNet), implement quad-redundant fieldbus networks, or isolate safety, control, monitoring, and historian networks on one board.

Key Technical Specifications

Key Selling Points & Differentiators

• Four independent 300 MHz processors – 1 ms scan rate on all four ports simultaneously.
• 1024 bytes I/O per port – 4096 bytes total I/O per direction across four ports.
• Connect to four different networks simultaneously – Profinet, EtherNet/IP, Modbus TCP, and DeviceNet. All on one board.
• Quad-redundant fieldbus capability – Configure all four ports with identical I/O mapping. Any three networks can fail, turbine continues uninterrupted.
• Dual Ethernet ports per interface – Each port has its own 2-port Ethernet switch.
• Full isolation between all ports (2500 VAC) – Port 1 (plant network), Port 2 (safety network), Port 3 (monitoring), Port 4 (historian). No ground loops.
• Conformal coated – For harsh environment operation.
• External power adapter included – Board draws 4.5 A at 5 V (22.5 W). We include external 5 V, 15 A supply.
• QC includes 336-hour quad-port stress test – 14 days continuous, all ports at maximum load, different protocols, zero cross-port interference.
• 10-year warranty

Frequently Asked Questions (FAQ)

Q: What is the difference between SLCCG3A (triple) and SLCCG4A (quad)?

Q: When would I need four independent fieldbus ports?
A: Four scenarios:

1. Quad-redundant fieldbus (safety-critical turbines): Port A/B/C/D to four independent networks. Any three can fail, turbine continues.
2. Four different networks: Profinet, EtherNet/IP, Modbus TCP, DeviceNet simultaneously.
3. Isolated networks: Plant (grounded), safety (floating), monitoring (different ground), historian (IT network).
4. High I/O count: 4096 bytes total I/O.

Q: What is the total backplane current requirement?
A: 4.5 A maximum at 5 VDC. The external 5 V, 15 A supply (included) connects to the board’s auxiliary power input. Do not attempt to power from backplane alone.

Q: How do I configure quad-redundant fieldbus?
A: Connect Ports 1–4 to four independent networks. Configure identical I/O mapping on all ports. In Mark V logic, implement “3 out of 4” voting or select highest quality. Failover is instantaneous (1 ms).

Q: What QC tests are specific to the SLCCG4A?
A: Twelve tests:

1. Port-to-port isolation: 3000 VAC between all 6 port pairs
2. Port-to-backplane isolation: 3000 VAC each port (4 tests)
3. Independent protocol test: Ports 1–4 running different protocols, 168 hours
4. Independent scan rate test: all ports at 1 ms
5. Simultaneous full load: all 4 ports at max load, 336 hours (14 days)
6. Quad-redundancy test: simulate failure of any three ports, fourth continues
7. Cross-port interference: zero errors
8. External power test
9. Temperature: −40°C to +70°C
10. Conformal coating inspection
11. Security: IEC 62443-4-2 SL2
12. Burn-in: 672 hours (28 days) at +65°C

Q: What shipping protection?
A: Anti-static bag, ESD foam cradle, hard plastic clamshell case, desiccant pack, humidity indicator, inert gas backfill. Double-wall box with “HIGH PERFORMANCE,” “HIGH VALUE” labels. Shock, tilt, temperature, humidity indicators. Calibration certificate laminated. 4 x USB cables, 4 x Ethernet cables, termination kits. External 5 V, 15 A supply. Each board ships individually in foam-lined flight case. Factory site visit mandatory for first-time installation. Contact us for scheduling (4–6 week lead time).

ICS TRIPLEX 151661
ASM 2506572-21 PLC DCS
ASM 2334801-21 PLC DCS