DS200SHCBG1A | GE PLC Dual Servo Amplifier Fast Ship

Description

Product Core Brief

• Model: DS200SHCBG1A
• Brand: General Electric (GE)
• Series: Mark V DS200
• Core Function: Enhanced dual-channel servo hydraulic amplifier
• Product Type: Enhanced Dual Servo Hydraulic (2 channels, A revision)
• Key Specs: 2 x 0–200 mA outputs | Removable terminals | Enhanced ESD | Extended temp range
• Condition: New Original.

Product Introduction

The DS200SHCBG1A is an enhanced dual-channel servo hydraulic amplifier for GE’s Mark V DS200 series, used in Speedtronic turbine control systems. It provides two independent 0–200 mA current outputs with removable terminal blocks, improved ESD protection, and extended temperature range.

The “A” revision of the SHCBG1 upgrades the base board with removable screw terminals (original had fixed terminals), enhanced common-mode filtering on inputs (60 dB vs 40 dB), improved ESD protection (±15 kV contact), and extended temperature range (−40°C to +70°C). Electrically identical to the base SHCBG1, but significantly easier to install and maintain.

Key Technical Specifications

Key Selling Points & Differentiators (A Revision Specific)

• Removable terminal blocks on all field connections – Original SHCBG1 had fixed terminals. Replace a damaged block without unwiring the entire board.
• Enhanced common-mode filtering (60 dB) – Original had 40 dB. Critical for long input cable runs (>500 ft) or near VFDs.
• Improved ESD protection (±15 kV contact) – Meets IEC 61000-4-2 Level 4. Field technicians without wrist straps will not damage the board.
• Extended temperature range (−40°C to +70°C) – Operates in unheated enclosures and cold climates.
• Color-coded terminal blocks per channel – Channel 1 (gray), Channel 2 (black). Reduces wiring errors.
• Torque card included – Laminated card with torque settings (0.5–0.6 Nm).
• QC includes dual-channel simultaneous test with enhanced filtering verification – Both channels tested concurrently.
• 2-year warranty

Frequently Asked Questions (FAQ)

Q: What is the difference between SHCBG1 (base) and SHCBG1A (A revision)?

Q: Can I replace a base SHCBG1 with an SHCBG1A without changing my wiring?
A: Yes—electrically identical. Transfer field wires from old fixed terminals to new removable blocks (remove block, land wires, plug into new board). Allow 2–3 hours for both channels.

Q: How do I remove a terminal block?
A: Each block has two side latches. Squeeze gently, pull straight up. Do not rock side to side. Install by pressing straight down until latches click. Tested for 500 cycles.

Q: What torque for the screw terminals?
A: 0.5–0.6 Nm (4.4–5.3 lb-in). Use torque screwdriver. Torque card included. Do not exceed 0.7 Nm.

Q: Does the enhanced CMRR (60 dB) add any delay?
A: No. Filtering is implemented in analog hardware. Group delay <100 µs at 60 Hz. No effect on control loop stability.

Q: What QC tests are specific to the SHCBG1A?
A: Standard tests per channel plus: removable terminal block torque verification (0.55 Nm), common-mode rejection (60 dB at 60 Hz), ESD test (±15 kV contact), low temperature operation (−40°C), dual-channel simultaneous step test, cross-channel interference (<2 mA induced), burn-in (72 hours at +65°C, both channels at 200 mA into 20Ω load).

Q: What shipping protection?
A: Anti-static bag, ESD foam cradle, double-wall box with “HEAVY,” “FRAGILE,” “ESD SENSITIVE” labels. Each board ships individually. Spare terminal blocks in separate bag. Potentiometer adjustment tools (2) included. Torque card included. Spare fuses included. External power supply not included (order separately). Configuration guide included.

Balluff RPTA-8010 PLC DCS
Baumer Thalheim ITD70A4Y16 PLC DCS
Atlas Copco TC52S PLC DCS
TELE Automation Typ:ESGT60 PLC DCS