Bently Nevada 190065A-00-04-01-00-00 | Replacement 42M, OEM-Traceable

  • Model: 190065A-00-04-01-00-00
  • Brand: Bently Nevada (Baker Hughes)
  • Series: 3500 Machinery Protection System — 3500/42M family
  • Core Function: Conditions proximity probe and seismic sensor signals into radial and axial vibration measurements with alarm setpoints.
  • Type: Proximity/Seismic Monitor (4-channel)
  • Key Specs: Four input channels for proximity and seismic sensors; option code 04 specifies the sensor/function configuration; full alarm and trip setpoint logic
  • Condition: New Original (New Surplus) — not refurbished
Manufacturer:

Our extensive catalogue, including , is available now for dispatch to the worldwide.
  • Email: jiedong@sxrszdh.com
  • Phone / Wechat:+86 15340683922

Description

 

Product Introduction

Option codes decide everything on a Bently order, and this one is built out with four segments after the dash. The BENTLY 190065A-00-04-01-00-00 is a 3500/42M Proximity/Seismic Monitor — the four-channel vibration card that takes proximity probe and seismic sensor signals and turns them into the radial and axial measurements your trip logic acts on.

That long suffix isn’t decoration. Each segment encodes a configuration choice: sensor type, input range, connector arrangement, and firmware option. Order the wrong suffix and you get a physically identical card that won’t match your probe set. Before ordering, pull the OEM option-code table and walk it segment by segment against your existing module’s label. In field deployments, option-code mismatches cause more wrong orders than any other single mistake.

 

Key Technical Specifications

Parameter Value
Part Number 190065A-00-04-01-00-00
Module type Proximity/Seismic Monitor (4-channel)
Platform Bently Nevada 3500 rack
Input channels 4, proximity and/or seismic per option config
Sensor types Proximity probes, velocity/seismic sensors
Alarm logic Multi-level alarm and trip setpoints
Option code suffix 00-04-01-00-00 — decode against OEM option table before order
Slot requirement 3500 rack slot
Operating temperature 0 to +65 °C (rack ambient)
Storage temperature −40 to +85 °C
Mounting 3500 backplane connector
Firmware Record revision before ordering

 

Quality Inspection Process

Vibration monitor cards get calibrated-input testing, not just a power-on check. A drift of a few millivolts on a proximity input shows up as a false trip at 3 AM.

Incoming verification. OEM packing slip or customs docs matched to serial number before opening. Bently Nevada serial lookup plus hologram check. Visual pass covers the front-panel connectors — bent pins or thread damage on the probe inputs mean reject — then backplane edge corrosion, reflow marks around the signal conditioning stage, and board discoloration. Accessories counted against the packing list.

Live functional test. Module slotted into a working 3500 rack with monitor cards installed. Boot sequence and LED pattern verified. Simulated proximity and seismic signals fed into each channel at known amplitudes and frequencies, then the resulting measurements checked against expected values in the rack configuration software. Alarm and trip setpoints exercised at every level. A 24-hour continuous run follows with channel values and temperature logged.

Electrical parameters. Insulation resistance at 500 V megger, >10 MΩ required. Ground continuity from chassis to backplane. Rails checked with a Fluke 115 multimeter.

Firmware verification. Firmware revision read and recorded on the test sheet. Option-code configuration and any jumper positions photographed as-found.

Final QC and packaging. QC sign-off with date, anti-static bag, bubble wrap, rigid carton, QC Passed label. Test photos and video available on request.

 

Field Replacement Pitfalls

Option-code mismatch is the top risk on this part. The suffix 00-04-01-00-00 encodes sensor type, range, and connector choices. Order a card that’s one segment off and it slots in fine — then your probe signals read wrong or not at all. Pull the OEM option-code table and match against the old module’s label before ordering. Every time.

Probe compatibility. ❗ A proximity probe’s sensitivity and linear range must match the channel configuration. I’ve seen a 200 mV/mil probe wired into a channel set up for 100 mV/mil — the numbers looked plausible for weeks before anyone noticed the scale was doubled.

Photograph the old module’s configuration before you pull it. Channel assignments, alarm setpoints, and transducer mapping live in the rack config file. Reload it after the swap and verify every channel against the old settings.

Keyphasor and phase reference. If this card handles phase measurements, the keyphasor input and reference must be configured correctly. A missing keyphasor gives you vibration data without phase — useless for balancing.

ESD. Wrist strap. The signal conditioning stage is sensitive to static.

Get these right and the monitor comes online clean.

 

New Original vs. Refurbished: Why It Matters

New Original (New Surplus) means OEM-manufactured, original packaging opened only for our bench test, no wear on the probe connectors, no board-level repairs, and a serial number traceable to Bently Nevada.

A refurbished vibration monitor hides aging components in the signal conditioning path — the exact circuits that drift and cause false trips. Failure rates run 3–5× higher than new. Without a traceable serial, OEM support and firmware programs stop at the door.

One false trip on a protected machine can cost 10× the price difference. What we provide: OEM packing slip photo, traceable serial number, bench test report with calibrated input results, anti-static bag seal or documented reason for opening. Price sits 30–50% above refurbished and 20–40% below OEM list — the delta covers global sourcing, the QC routine above, and a 12-month warranty.

 

Performance Benchmarks & Test Results

Bench data from our 3500 test rack, 25 °C ambient, 24 VDC supply, firmware as-shipped:

  • Channel accuracy: simulated proximity and seismic inputs reproduced within OEM tolerance on all tested channels
  • Alarm/trip logic: every setpoint level exercised and verified in the configuration software
  • 24-hour continuous run: channel values stable, zero false trips, ambient 22–27 °C
  • Insulation resistance: >10 MΩ at 500 V megger
  • Rack integration: coexisted with comms and relay cards, no bus contention
  • Thermal note: rack ambient above the OEM rating changes derating — check the curve before deploying in a hot cabinet

Exact accuracy figures, frequency response, and MTBF depend on option configuration and firmware — verify against the OEM datasheet for your specific suffix.

 

FAQ

What do the option-code segments in 190065A-00-04-01-00-00 mean?
They encode sensor type, input range, connector arrangement, and firmware options. Decode each segment against the OEM option table before ordering.

Can this card take both proximity and seismic sensors?
The 3500/42M family supports both, but the exact mix depends on the option code. Confirm against your configuration.

Is this monitor new or refurbished?
New Original (New Surplus) — OEM-manufactured, bench-tested with calibrated inputs, traceable serial number. Not refurbished.

Why does my replacement 42M read wrong vibration values?
Usually an option-code or channel-configuration mismatch. Verify the suffix against the old module’s label and reload the rack configuration file.

Brand new✔ In stock ✔ Fast shipping✔
  • Email: sales@plcfcs.com
  • Phone:+86 15343416922
  • Wechat:+86 15343416922
Advantageous products we supply
PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider
DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation,YOKOGAWA, Woodword, HIMA
TSI : Triconex , HIMA , Bently Nevada , ICS Triplex
Complete service we offer
Payment: T/T
Delivery: 1-2 days
Shipment: DHL UPS FedEx, etc
After-sales service: Yes, 24/7 hours