Honeywell FC-TSAI-1620M | Safety Analog Input Module, 16-Channel

  • Model: FC-TSAI-1620M
  • Brand: Honeywell
  • Series: Honeywell safety system I/O modules (FSC / safety manager heritage)
  • Core Function: Reads analog field signals into a Honeywell safety system, providing high-channel-count analog input processing with fault detection.
  • Product Type: Safety Analog Input Module (SIS I/O card)
  • Key Specs: 16 analog input channels; safety-rated I/O; chassis-slot mount; fault detection per channel
  • ⚠️ Safety-system spare. Condition: New Surplus and refurbished stock common — verify firmware, revision, and certification with the seller.
Manufacturer:

Our extensive catalogue, including , is available now for dispatch to the worldwide.
  • Email: jiedong@sxrszdh.com
  • Phone / Wechat:+86 15340683922

Description

 

Product Introduction

Analog inputs on a safety system carry the process variable that triggers a trip — pressure, level, temperature — so a drifting or frozen channel is a safety concern, not a maintenance item. Honeywell’s FC-TSAI-1620M is a 16-channel safety analog input module, reading field signals into the Honeywell safety system with per-channel fault detection so a failed sensor leg gets flagged before it masks a real trip condition.

Channel density is the practical advantage. Sixteen channels per module means fewer slots consumed in a safety chassis — the kind of thing that matters when the rack is full and a spare slot does not exist. Against replacing the I/O chassis, a matching module restores the channel set without reopening the safety case. Verify firmware revision, module revision, and certification status against the site documentation before ordering, and involve your SIS engineer in the acceptance check.

 

Key Technical Specifications

Parameter Value
Platform Honeywell safety system (FSC / safety manager lineage)
Model FC-TSAI-1620M
Module Type Safety analog input
Channel Count 16 analog inputs
Input Type Analog field signals — verify range per OEM manual
Diagnostics Per-channel fault detection
Safety Role SIS I/O — validated per site Safety Instrumented Function
Chassis Slot Safety chassis slot — verify assignment
Configuration System-level; confirm backup availability
Firmware Revision-sensitive — log the exact revision
Power Supply From safety chassis — verify slot budget
Certification Confirm safety certification status with seller

 

Compatible Replacement Models

Model Compatibility Notes
FC-TSAI-1620M (same revision) ✅ Drop-in Match revision and certification; validated SIF carries over
Other FC-TSAI variants ⚠️ Software Compatible Same family; channel or range spec differs — SIS engineer review required
Non-Honeywell safety I/O ❌ Hardware Incompatible Different architecture — do not substitute without safety-case review

Revision matching is not optional on a safety system. The SIF was validated against a specific module revision — get your SIS engineer’s sign-off before substituting.

 

Frequently Asked Questions

How do I confirm the replacement matches my safety system?
Match the model FC-TSAI-1620M and the module revision against the old module’s label and your site documentation. Safety systems are validated against specific revisions, so involve your SIS engineer in the selection.

What happens to my SIF validation after a module swap?
It may carry over for an identical revision, or it may need reassessment for a different one. This is a site-specific call — get it in writing from your SIS engineer before returning the module to service.

Can I hot-swap the module?
Depends on the chassis and its redundancy configuration. Verify the specific module’s hot-swap status in the OEM manual and follow your site’s SIS procedures — never assume on a safety system.

What typically fails on these modules?
Input protection components and interface circuits, often after field wiring faults or transients. Check field wiring insulation and grounding before installing a replacement — a field fault can damage the new card.

How should a surplus module be tested?
Bench power-up, diagnostics check, and function test across all 16 channels. Ask for the test log and revision string. For a safety-system spare, have your SIS engineer review the acceptance records before install.

Does the module carry safety certification?
Certification is tied to the module and its application. Ask the seller for the certification documentation and confirm with your site’s safety authority — do not assume a surplus unit carries the same certification as a factory-new module.

What warranty should I expect on surplus stock?
30 to 90 days is the common range for tested refurbished units. Given safety criticality, get DOA terms and return policy in writing before ordering.

Brand new✔ In stock ✔ Fast shipping✔
  • Email: sales@plcfcs.com
  • Phone:+86 15343416922
  • Wechat:+86 15343416922
Advantageous products we supply
PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider
DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation,YOKOGAWA, Woodword, HIMA
TSI : Triconex , HIMA , Bently Nevada , ICS Triplex
Complete service we offer
Payment: T/T
Delivery: 1-2 days
Shipment: DHL UPS FedEx, etc
After-sales service: Yes, 24/7 hours