IS215GBIAH1A | GE Mark VIe GBIA Board | In Stock

Description

Product Introduction

The GE IS215GBIAH1A is a VMEbus digital input board from the Mark VIe Speedtronic series, purpose-built for high-density discrete signal monitoring in turbine control applications. This board interfaces with field devices such as limit switches, pressure switches, temperature switches, pushbuttons, and relay contacts to provide critical status information for turbine protection, sequencing, and operator indication. The H1A revision features robust isolation, high-speed scanning, and comprehensive diagnostics.

What sets the GBIAH1A revision apart is its 32-channel capacity with full optical isolation (2,500 VDC), high-speed scanning (1 ms for all 32 channels), and software-configurable input filtering with debounce options. Each channel features 24 VDC nominal input with wide tolerance (18–32 VDC) and programmable debounce filtering to eliminate false triggers from contact bounce. The board includes per-channel status monitoring and comprehensive diagnostics. For system integrators requiring high-density, reliable digital input capability for turbine control and protection systems, this board is the direct OEM solution.

Key Technical Specifications

Key Selling Points & Differentiators

• High Channel Density: 32 digital inputs on a single VME slot—reduces chassis space requirements and system cost.
• Full Optical Isolation: 2,500 VDC isolation protects the backplane and control system from field wiring faults.
• Configurable Input Filtering: Software-programmable debounce filtering (1–32 ms) eliminates false triggers from contact bounce without hardware modifications.
• Wide Voltage Tolerance: Accepts 18–32 VDC—compatible with industrial 24 VDC supply variations.
• High-Speed Scanning: 1 ms scan rate for all 32 channels—ideal for fast protection and interlock applications.
• Per-Channel Status: Continuous status monitoring for rapid fault identification.
• Live Test Verified: Every board undergoes a 48-hour burn-in with all 32 channels exercised across the full voltage and temperature range. We log isolation integrity, scan rate, filter accuracy, and diagnostic performance.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels. No clones, no pull-and-refurbish from unknown sources.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and configuration before shipment.

Frequently Asked Questions (FAQ)

Q: What is the difference between IS215GBIAH1A and IS200WDIIH3A?

A: Both boards provide 32 digital inputs with similar specifications. The GBIAH1A is a newer revision with improved diagnostics and firmware compatibility. Verify with your existing system before replacing. In most cases, they are interchangeable.

Q: What is the difference between IS215GBIAH1A and IS215GBIAH1B?

A: The H1B revision typically includes enhanced diagnostics or minor performance improvements. The H1A is the base revision. Check your existing board—if you have H1B, verify compatibility. In most cases, H1A and H1B are interchangeable, but confirm with the board’s firmware requirements.

Q: What type of digital inputs does this board support?

A: The GBIAH1A supports sourcing inputs—the field device provides the 24 VDC signal to the module. Each channel has a dedicated input terminal and a common return. The board does not support sinking inputs. If you have sinking field devices, you’ll need a different module or an external interface.

Q: What is the input filter and why is it important?

A: The input filter eliminates false triggers from contact bounce and electrical noise. You can configure the filter time from 1 ms (minimal filtering, fastest response) to 32 ms (maximum filtering, slowest response). For protection channels, use minimal filtering for fastest response. For operator indication or status monitoring, use longer filtering to prevent nuisance alarms.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews pull a GBIA while the cabinet was still powered—it damaged the optical isolators on multiple channels. Don’t risk it.

Q: What is the scan rate and why does it matter?

A: The scan rate is the time it takes the board to read and report all 32 inputs. The GBIAH1A scans all channels in 1 ms. This is critical for protection applications where rapid response to changes is required (e.g., emergency trip signals). For slower applications (e.g., operator indication), the scan rate is less critical.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours of order placement and payment confirmation. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS215GBIAH1A is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220GBIA (with additional redundancy, diagnostic coverage, and separate safety shutdown path). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t solve my digital input issue?

A: If the board is electrically functional (passes our QC test) but doesn’t correct your fault, we’ll accept a return within 30 days provided the board shows no physical damage and the connectors are intact. We do charge a 15% restocking fee if the fault was due to field wiring issues, configuration errors, or toolkit compatibility problems. We’ll work with you over the phone or email to diagnose the problem before we ship—our goal is to get you running, not to ship boxes back and forth.

IS200 JPDLG1AAC CIRCUIT BOARD
IS200 JPDMG 28V DC PDM
IS200 JPDMG1A 28V DC PDM
IS200 JPDPG I/O PACK PDM