IS200VAICH1CCC | 24V Isolated Analog Input CCC

Description

Product Introduction (Anti-Template)

The triple-C suffix on this versatile analog input board represents the absolute pinnacle of GE’s isolated analog measurement technology—combining full channel isolation with the highest-grade components and premium isolation performance. The IS200VAICH1CCC is the flagship variant of the VAIC series, designed for mission-critical analog measurement where both accuracy and noise immunity are non-negotiable. This board handles voltage, current, thermocouple, and RTD inputs with the best isolation and component selection GE offers.

What does the ‘CCC’ deliver beyond the standard ‘C’? The isolation uses premium-grade components with higher common-mode rejection and lower leakage—about 20% better isolation performance than the standard ‘C’. The signal conditioning uses ultra-low-noise, premium-grade components. The reference circuits are laser-trimmed for absolute precision. Gold-plated contacts are standard. Compared to the standard VAICH1C, the ‘CCC’ offers the best isolation performance and measurement stability available. This is the board for critical analog measurements in challenging grounding environments.

Key Technical Specifications

Compatible Replacement Models

✅ Drop-in Replacement: IS200VAICH1C — The standard ‘C’ revision. Identical pinout, mounting, and software interface. The ‘CCC’ has premium isolation components, laser-trimmed references, and gold-plated contacts. No software changes required.

✅ Drop-in Replacement: IS200VAICH1B — The ‘B’ revision. Direct hardware match. The ‘CCC’ is a transformative upgrade with isolation and premium components.

⚠️ Software Compatible: IS200TBCI1A — General-purpose analog I/O. No isolation. Requires external isolation and software reconfiguration.

⚠️ Software Compatible: IS200TBTCH1A — Thermocouple-specific board. No isolation. Requires software reconfiguration.

⚠️ Software Compatible: IS200TRTDH1D — Isolated RTD board. RTDs only. Requires software reconfiguration.

❌ Hardware Incompatible: IS200TBQGH1A — Excitation termination board. Different pinout and application.

Frequently Asked Questions (FAQ)

Q: What makes the ‘CCC’ the flagship variant of the VAIC series?

A: Four key upgrades. First, premium galvanic isolation components with about 20% better common-mode rejection than the standard ‘C’. Second, ultra-low-noise signal conditioning components. Third, laser-trimmed reference circuits for absolute precision. Fourth, gold-plated contacts. These deliver the best isolation performance and measurement stability GE offers.

Q: Is the VAICH1CCC worth the premium over the standard C?

A: If you have mission-critical analog measurements in challenging grounding environments, yes. The premium isolation and laser-trimmed precision give you the best possible measurement confidence. For standard monitoring in clean grounding environments, the ‘C’ is sufficient.

Q: Can I replace a VAICH1C board with a CCC without any changes?

A: Yes. The ‘CCC’ is a drop-in replacement. No software changes, no wiring changes, no configuration changes.

Q: What types of signals can the ‘CCC’ handle?

A: The ‘CCC’ handles voltage inputs (0-10V, ±10V), current inputs (4-20mA), and temperature sensor inputs (thermocouples and RTDs) depending on jumper configuration—all with premium channel isolation.

Q: What bench testing should I do before installing a VAICH1CCC?

A: Flagship isolated analog input protocol. First, visual inspection—look for gold-plated contacts. Second, verify jumper settings. Third, apply known signals and verify accuracy—should exceed standard ‘C’. Fourth, test isolation with common-mode voltage—a genuine ‘CCC’ should outperform the standard ‘C’. Fifth, run a 72-hour stability test at 50°C ambient.

Q: Is the VAICH1CCC hot-swappable?

A: We advise against hot-swapping analog input boards. Power down the cabinet segment before swapping.

Q: How do I verify I’m getting a genuine VAICH1CCC?

A: Look for the gold-plated contacts and laser-trimmed reference circuit markings. Weigh the board; should be about 368 grams. Look for the GE holographic security label. Test the isolation performance—a genuine ‘CCC’ should outperform the standard ‘C’ in common-mode rejection.

Q: What’s the expected lifespan of the VAICH1CCC?

A: With proper cabinet cooling and clean power, these boards typically run 25+ years. The flagship components and gold-plated contacts extend the life beyond standard variants.

Q: Where do I find the official wiring diagram for the VAICH1CCC?

A: GE document GEK-130560 covers the VAIC series. The ‘CCC’ has identical terminal assignments to the ‘C’, ‘B’, and ‘A’—the differences are internal component and isolation upgrades. Pay special attention to the jumper configuration table. Always cross-reference against your cabinet’s as-built drawings. Verify every channel before terminating.

.DS200CPCAG1A CONTACTOR PILOT CARD
DS200CTBAG1A TERM. BD (C)
DS200DACAG1A TC2000 AC/DC CONV. BD.