IS200VAICH1CBA | New Surplus GE VAIC PCB

Description

Product Introduction (Anti-Template)

The ‘CBA’ suffix on this versatile analog input board represents another component variant built on the fully isolated architecture of the ‘C’ revision. The IS200VAICH1CBA is a VAIC series board with galvanically isolated inputs and the ‘BA’ variant-specific component selection.

What does ‘CBA’ mean in practice? The ‘BA’ portion typically indicates component substitutions—often different isolation components, precision resistors, or connectors driven by supply chain changes or customer requirements. The board retains all functional characteristics of the standard VAICH1C (channel isolation, isolated signal conditioning) but may have slightly different isolation performance, accuracy, or long-term stability depending on the substituted parts. If you’re replacing an existing ‘CBA’ board, match the suffix. If you’re substituting a standard ‘C’ for a ‘CBA’, verify the component differences with GE documentation or your OEM.

Key Technical Specifications

Compatible Replacement Models

✅ Drop-in Replacement: IS200VAICH1C — The standard ‘C’ revision. Identical pinout, mounting, and software interface. The ‘CBA’ uses different component selections. Most applications won’t see a difference.

✅ Drop-in Replacement: IS200VAICH1B — The ‘B’ revision. Direct hardware match. The ‘C’ revision (including ‘CBA’) has channel isolation.

⚠️ Software Compatible: IS200TBCI1A — General-purpose analog I/O. No isolation. Requires external isolation and software reconfiguration.

⚠️ Software Compatible: IS200TBTCH1A — Thermocouple-specific board. No isolation. Requires software reconfiguration.

⚠️ Software Compatible: IS200TRTDH1D — Isolated RTD board. RTDs only. Requires software reconfiguration.

❌ Hardware Incompatible: IS200TBQGH1A — Excitation termination board. Different pinout and application.

Frequently Asked Questions (FAQ)

Q: What does the ‘CBA’ suffix mean on this VAIC board?

A: The ‘CBA’ suffix indicates a component variant within the ‘C’ revision family. It’s not a standard upgrade path—typically, ‘CBA’ means GE used different components (isolation devices, precision resistors, or connectors) due to supply chain changes or a customer request. The board functions identically from a wiring perspective.

Q: Can I replace a ‘CBA’ board with a standard ‘C’ revision?

A: Usually yes—the boards are pin-for-pin compatible. However, some ‘CBA’ variants have different isolation or accuracy characteristics. If those differences matter to your critical measurements, match the suffix.

Q: How do I know if I need the ‘CBA’ variant?

A: Check your original bill of materials or the board’s placement in your system. If the board you’re replacing has a ‘CBA’ suffix, replace it with the same suffix.

Q: Is the VAICH1CBA hot-swappable?

A: We advise against hot-swapping analog input boards. Power down the cabinet segment before swapping.

Q: What bench testing should I do before installing a VAICH1CBA?

A: Standard isolated analog input protocol with component verification. First, visual inspection. Second, verify jumper settings. Third, apply known signals and verify accuracy—may differ from standard ‘C’. Fourth, test isolation by applying common-mode voltage.

Q: How do I verify I’m getting a genuine VAICH1CBA?

A: Check component markings against GE’s documented parts list. Weigh the board; should be about 365 grams. Look for the GE holographic security label.

Q: Where do I find the official wiring diagram for the VAICH1CBA?

A: GE document GEK-130560 covers the VAIC series. The ‘CBA’ suffix typically does not change the wiring diagram. Always cross-reference against your cabinet’s as-built drawings. Verify every channel before terminating.

DS200ACNAG1A CARD ARCNET
DS200ADMAH1AAA ANALOG TO DIG.MODULE