IS200TRPGH1A | GE Mark VIe TRPG Relay Output Board

Description

Product Introduction (Anti-Template)

When you don’t need annunciator-specific features or latching mechanisms, but you still need reliable relay outputs, this board is the workhorse you turn to. The IS200TRPGH1A is the TRPG (Terminal Board Relay Output – General Purpose) variant for the Mark VIe system, designed for general-purpose relay outputs across turbine control, monitoring, and auxiliary applications. This board handles the interface between the Mark VIe controller and standard relay-driven field devices.

The ‘H1A’ designation indicates the first variant with the ‘A’ revision. The key differentiator of the TRPG series is its general-purpose nature—it’s not specialized for annunciation (TRPA), latching (TRLY), or high-density (TRESH) applications. The ‘A’ revision represents minor refinements—improved relay contact material for better longevity and updated component selection. Compared to the base IS200TRPGH1, the ‘A’ adds better contact life in cycling applications. This board is a drop-in replacement for the IS200TRPGH1, with no software changes required.

Key Technical Specifications

Compatible Replacement Models

✅ Drop-in Replacement: IS200TRPGH1 — The base revision without the ‘A’ suffix. Identical pinout, mounting, and software interface. The ‘A’ revision has improved relay contact material. No software changes required.

⚠️ Software Compatible: IS200TREGH1A — Very similar general-purpose relay board. The TRPG and TREGH series are closely related—verify if there are any differences in your specific application.

⚠️ Software Compatible: IS200TRPAH1A — Annunciator relay board. Includes status LEDs—may be used as a replacement with minor software changes if LEDs are not required. Budget 1-2 hours.

⚠️ Software Compatible: IS200TBCI1A — General-purpose I/O board. Requires external interposing relays and complete hardware/software rework. Budget 6-8 hours plus validation.

❌ Hardware Incompatible: IS200TPROH1A — Triac output board. Different switching characteristics. Not suitable for relay applications.

Frequently Asked Questions (FAQ)

Q: What’s the difference between the TRPG and TREGH series?

A: Both are general-purpose relay boards. The TRPG is the standard general-purpose variant. The TREGH series often has slightly different channel configurations or was produced for different application subsets. In practice, the differences are often minor—verify pinout compatibility before substituting.

Q: What types of loads can the TRPG board switch?

A: The TRPG is designed for general-purpose relay outputs—indicator lights, interposing relays, small contactors, and other low-to-moderate power loads. It’s a versatile board for standard switching applications.

Q: What improvements does the ‘A’ revision have over the base TRPGH1?

A: The ‘A’ revision uses improved relay contact material for better resistance to welding and longer life in cycling applications.

Q: Can I replace a TRPGH1 board with a TRPGH1A without any changes?

A: Yes. The ‘A’ is a drop-in replacement. No software changes, no wiring changes, no configuration changes.

Q: Is the TRPG board hot-swappable?

A: We advise against hot-swapping relay boards. Power down the cabinet segment before swapping.

Q: What bench testing should I do before installing a TRPG board?

A: Standard relay protocol. First, visual inspection. Second, verify continuity between each terminal block and its corresponding D-sub pin. Third, measure contact resistance. Fourth, apply power and verify each relay actuates correctly. Fifth, run a 24-hour cycle test at 50°C ambient.

Q: How do I verify I’m getting a genuine TRPG board?

A: Check the relay markings against GE documentation. Weigh the board; should be about 360 grams. Look for the GE holographic security label.

Q: Where do I find the official wiring diagram for the TRPGH1A?

A: GE document GEK-130547 covers the TRPG series. The H1 variant is detailed in the section specific to that configuration. Always cross-reference against your cabinet’s as-built drawings.

GE WESDAC D20ME PLC
A-B 1785-L80E PLC
Rexroth HZF01.1-W045N PLC