IS200DTAIH1ACC | Mark VI Analog I/O Board, Fast Ship

Description

Product Introduction

The GE IS200DTAIH1ACC is an analog I/O board designed for the Mark VI Speedtronic turbine control system. This board provides analog input and output capabilities for gas turbine, steam turbine, and generator control applications, interfacing with sensors, actuators, and the turbine controller via the VME backplane. The IS200DTAIH1ACC mounts in a Mark VI I/O rack and is a critical component for fuel control, temperature monitoring, and position feedback loops.

The Mark VI is GE’s legacy turbine control platform, widely deployed in power generation, oil and gas, and marine propulsion applications. Although GE has introduced newer platforms such as the Mark VIe and Mark VII, thousands of Mark VI systems remain in operation today. The IS200DTAIH1ACC is part of the DTAI (Digital to Analog I/O) family of boards, which handle the interface between the turbine controller and field devices. For facilities operating Mark VI turbines, sourcing verified replacement boards is essential for maintaining reliability and avoiding extended downtime.

Key Technical Specifications

Key Selling Points & Differentiators

• Mark VI Legacy Support: Direct replacement for original GE Mark VI turbine control systems. No configuration changes or rack modifications required when replacing a failed unit with the same part number.
• Critical Turbine Application: Used in fuel control, temperature monitoring, and actuator position feedback loops. Proper function is essential for safe and efficient turbine operation.
• VME Form Factor: Standard 6U VME form factor compatible with Mark VI I/O racks and backplanes. Drops into existing chassis with no mechanical modifications.
• Multiple Signal Types: Supports both analog inputs and outputs on a single board, reducing the number of required slots in the I/O rack for applications requiring both functions.
• Authenticity Guarantee: Each unit undergoes visual inspection for GE OEM markings, serial number traceability, and PCB integrity. We test every board on a live Mark VI backplane or VME test system before shipping.

Frequently Asked Questions (FAQ)

Q: Which GE turbine control systems is the IS200DTAIH1ACC compatible with?
The IS200DTAIH1ACC is designed specifically for the GE Mark VI Speedtronic turbine control system. It is not compatible with Mark V, Mark VIe, or Mark VII platforms without significant system modifications. If you have a Mark VIe system, you need the corresponding I/O board from the IS420 or other series.

Q: Is this board discontinued?
Yes. GE has phased out the Mark VI platform in favor of the Mark VIe. The IS200DTAIH1ACC is no longer in active production. Availability is limited to new surplus and tested used inventory. For Mark VI systems still in operation, we recommend securing spares while stock remains available.

Q: What is the difference between the IS200DTAIH1ACC and the IS200DTAIH1A?
The -ACC suffix represents the final hardware revision for this board. Earlier revisions such as -AAA, -AAB, or -ACA may have minor component differences. The -ACC revision is backward-compatible and can replace any earlier revision without modification to the system configuration or wiring. If your system currently uses an earlier revision, the -ACC is a direct drop-in replacement.

Q: What are typical failure modes for this board?
In our experience, the most common failures on Mark VI I/O boards include:

• Capacitor aging causing power supply ripple or signal drift
• Field wiring shorts damaging input or output channels
• VME backplane connector corrosion in high-humidity environments
• Component failure from thermal cycling in turbine compartments

We recommend keeping spare boards on hand and performing I/O calibration checks during scheduled turbine outages.

Q: Does this board require configuration before installation?
Yes. The IS200DTAIH1ACC may require DIP switch or jumper configuration for addressing, signal range selection, and operating modes. Before removing your existing board, we strongly recommend photographing the switch and jumper positions. When installing the replacement, replicate those settings exactly. If you do not have documentation for the correct settings, we can assist with configuration guidance based on your application.

Q: Can I hot-swap this board in a running Mark VI system?
No. The Mark VI VME backplane does not support hot-swap of I/O boards. The system must be powered down before removing or inserting any board. Attempting to remove or install a board with power applied can damage the board, the backplane, or the controller, and may result in turbine trip or unsafe conditions.

Q: What testing do you perform before shipping?
We test every IS200DTAIH1ACC on a live Mark VI VME backplane or dedicated test system. Our test procedure includes:

• Visual inspection for physical damage, corrosion, or previous repairs
• VME backplane communication verification
• Input channel testing across all ranges with precision signal sources
• Output channel testing with load simulation and accuracy verification
• Jumper and switch verification against customer-provided configuration (when available)
• 24-hour continuous power-on soak test

A test report with channel measurements and test results is included with each shipment.

9905-726 PLC
9905-377 PLC
9905-002N
9905-002L PLC