GE IS215VPROH2B | VME CPU Module | Fast Shipping

Description

Product Introduction

The GE IS215VPROH2B is a VMEbus high-performance processor board from the Mark VIe Speedtronic series, purpose-built as the primary computational engine for heavy-duty turbine control in power generation and oil & gas applications. This board executes turbine protection logic, speed/load control, and sequence-of-events recording—the core intelligence of the Mark VIe control system. The H2B revision features a faster processor, increased memory, and enhanced diagnostics.

What sets the VPROH2B revision apart is its 400 MHz PowerPC processor, 256 MB SDRAM, 128 MB flash memory, dual Gigabit Ethernet ports, and advanced diagnostic capabilities. This translates to faster application execution, significantly more headroom for complex control algorithms, improved data logging, and faster communications. For system integrators requiring the highest performance for advanced turbine control applications, this board is the direct OEM replacement.

Key Technical Specifications

Key Selling Points & Differentiators

• Faster Processor: 400 MHz vs. 300 MHz—33% faster execution for complex control algorithms.
• Double Memory Capacity: 256 MB SDRAM and 128 MB flash—twice the memory of H1B, supporting larger applications and more data logging.
• Gigabit Ethernet: Dual 10/100/1000Base-T ports for faster communications and data transfer.
• Performance Headroom: Increased memory and processing power reduce page faults and enable more deterministic scan times.
• Enhanced Diagnostics: Comprehensive self-test and monitoring capabilities for improved fault detection.
• Live Test Verified: Every board undergoes a 48-hour burn-in running actual turbine simulation loops. We log all Ethernet handshakes, VME arbitration cycles, and I/O scan times.
• 90-Day Warranty: Covers functional defects. If it fails under normal operating conditions, we replace it. No restocking fee for verified returns.
• OEM Traceability: All units come from audited surplus channels with original GE anti-static bags and serialized labels.
• Configuration Backup Service (Free): Upon request, we extract and archive your existing board’s firmware version and application config before shipment.

Frequently Asked Questions (FAQ)

Q: What is the difference between IS215VPROH2B and IS215VPROH1B?

A: The H2B has a faster processor (400 MHz vs. 300 MHz), double the memory (256 MB vs. 128 MB, 128 MB flash vs. 64 MB), and dual Gigabit Ethernet ports vs. 10/100 ports. The H2B also requires Mark VIe Toolkit v6.5 or higher vs. v6.0 for H1B. If you need the highest performance and latest features, choose H2B.

Q: What is the difference between IS215VPROH2B and IS215VPROH2A?

A: The H2B revision typically includes enhanced diagnostics or minor performance improvements over H2A. Check your existing board—if you have H2A, verify compatibility. In most cases, H2A and H2B are interchangeable, but confirm with the board’s firmware requirements.

Q: Can I replace an H1B board with an H2B?

A: Yes—with a firmware caveat. The H2B will physically fit in the same VME slot and has the same connector pinout. However, you must be running Mark VIe Toolkit v6.5 or higher. Additionally, your application from H1B may need to be recompiled for the H2B platform. We strongly recommend backing up your existing configuration and testing the H2B in a spare rack before deploying it in production.

Q: Is this board hot-swappable?

A: No. The Mark VIe VME backplane does not support live insertion. You must de-energize the rack, ground yourself, and wait 30 seconds for bulk capacitors to discharge. We’ve seen field crews try to pull a VPRO while the cabinet was still on auxiliary power—it took out the backplane driver chips.

Q: What are the benefits of the dual Gigabit Ethernet ports?

A: Dual Gigabit Ethernet ports provide significantly faster communications for data logging, remote access, and system networking. The increased bandwidth supports higher data throughput for trending, event logging, and communication with plant DCS systems.

Q: Will I lose my turbine protection settings when I replace the board?

A: Yes and no. Application logic and setpoints are stored in the application flash and in the separate memory on the I/O boards, not primarily on the VPRO. However, the VPRO does hold the executive firmware and the boot configuration. If your old board is dead and you can’t extract the configuration, you’ll need to reload from your backup file.

Q: What is the typical lead time for this part?

A: We stock these on the shelf—usually ship within 24 hours. For international orders, add 3–5 days for customs. If you need expedited (overnight air), coordinate with our logistics team.

Q: Does this board work with the newer Mark VIeS (SIL-rated) cabinets?

A: To be direct: no. The IS215VPROH2B is not SIL-certified. It’s meant for standard Mark VIe industrial control. The SIL-rated systems use the IS220VPRO (with different component ratings and a separate safety watchdog). Mixing them violates your site’s safety integrity level.

Q: What’s your return policy if this doesn’t solve my fault code?

A: If the board passes our QC test but doesn’t clear your turbine fault, accept a return within 30 days provided no physical damage. We charge a 15% restocking fee if the fault was due to application mismatch. We’ll diagnose with you before shipping.

IS200AVIFH BRIDGE INTERFACE
IS200AVIFH1A BRIDGE INTERFACE
IS200BAIAH PWM2/3 I/O BOARD