GE IS200EACFG3BAA | Mark VIe Ethernet Communication Module In Stock

Description

Product Introduction

The GE IS200EACFG3BAA is an advanced Ethernet communication module in the Mark VIe EACF family, providing 4 ports of 1 GbE connectivity with a specific hardware configuration for high-speed turbine control system communication. This I/O pack enables rapid data exchange with operator HMIs, plant DCS networks, and other control devices with advanced diagnostic capabilities and gigabit speeds.

The 3BAA suffix denotes the latest generation with 1 GbE capability and a specific hardware configuration. In our field experience, this variant offers significantly improved network throughput over previous 10/100 versions, advanced diagnostics, and particular hardware features that make it suitable for the most demanding network connectivity applications. For facilities requiring high-performance, reliable network communication with gigabit speeds, the EACFG3BAA provides the solution.

Key Technical Specifications

Key Selling Points & Differentiators

• 1 GbE communication – provides significantly higher network throughput than 10/100 versions.
• 4-port design – provides multiple network interfaces for redundant connectivity.
• Network redundancy support – dual-redundant network connections ensure continuous communication.
• Specific hardware configuration – unique configuration for demanding applications.
• Advanced diagnostics – enhanced network diagnostic features for troubleshooting.
• Rigorous 48-hour burn-in – each unit runs with all ports under network load across temperature cycling.
• 3-year warranty on hardware – backed by our in-house repair depot with average 48-hour turnaround.

Frequently Asked Questions (FAQ)

Can I hot-swap this IS200EACFG3BAA into a running Mark VIe system?

We strongly advise against it. The EACFG3BAA has shown unpredictable behavior when inserted into a powered backplane. Schedule a controlled outage, de-energize the rack, and swap it during planned maintenance.

What is the difference between the IS200EACFG2BAA and the IS200EACFG3BAA?

The 3BAA provides 1 GbE ports compared to the 2BAA’s 10/100 ports. The 3BAA also requires ToolboxST version 6.5 or higher.

What is the difference between the IS200EACFG3AAA and the IS200EACFG3BAA?

The BAA has a specific hardware configuration with unique performance characteristics that differ from the AAA. The exact differences vary by production batch. We can provide specific details for your unit if you contact us with the serial number.

What protocols does this module support?

The EACF supports Modbus/TCP, Ethernet/IP, and OPC protocols for communication with HMIs, plant DCS, and other control devices.

How do I verify this is a genuine GE module?

We source exclusively from GE-authorized liquidations. Our verification includes OEM packaging inspection, serial number cross-check against GE records, and PCB inspection for GE-specific markings. We test all ports under load.

Will I lose any configuration data when I replace the module?

Communication modules have minimal user-configurable parameters stored in EEPROM. You will need to reconfigure the new module in ToolboxST after installation.

What is the expected lifespan of this unit?

We see MTBF around 145,000 hours for the 3BAA revision. We have seen these units exceed 15 years in field service.

Which termination board should I use with this module?

The IS200EACFG3BAA mates with GE-specific termination boards. We include wiring diagrams with every order.

D0F3330 TRICONEX
TRICONEX DIF3236
ADF6705 TRICONEX
TRICONEX F6217