GE IS200DSPXH1BCA | Mark VIe Speed Input Module In Stock

Description

Product Introduction

The GE IS200DSPXH1BCA is a specialized dedicated speed input module in the Mark VIe DSPX family, providing 3 channels of high-accuracy speed measurement with a specific hardware configuration and enhanced load drive capability for demanding overspeed protection and speed control applications. This I/O pack interfaces with magnetic pickups and proximity probes, converting sensor signals to precise speed data with robust signal conditioning.

The BCA suffix denotes a distinct hardware build with specific input filtering, enhanced load drive, and diagnostic characteristics that differ from other DSPX variants. In our field experience, this variant was produced for specific OEM applications where particular sensor characteristics or noise environments required specific signal conditioning. The BCA’s unique input characteristics and enhanced load drive make it particularly suitable for installations with long cable runs or challenging signal conditions. For plants that have standardized on a particular sensor type and require this specific module revision, the BCA provides the exact drop-in replacement needed.

Key Technical Specifications

Key Selling Points & Differentiators

• Specific hardware configuration – unique input filtering and signal conditioning for particular sensor types or noise environments. Not available in other DSPX variants.
• Enhanced load drive capability – improved input circuitry that provides better noise immunity and signal integrity. Suitable for long cable runs and challenging sensor installations.
• 3-channel dedicated speed input – optimized specifically for speed measurement with enhanced input characteristics.
• Unique diagnostic features – specific diagnostic capabilities tailored to the BCA’s input configuration.
• Rigorous 48-hour burn-in – each unit runs with all 3 channels driven by a calibrated frequency source while monitoring for measurement accuracy and stability.
• 3-year warranty on hardware – backed by our in-house repair depot with average 48-hour turnaround. Dedicated DSPX swap-pool ensures rapid replacement.

Frequently Asked Questions (FAQ)

Can I hot-swap this IS200DSPXH1BCA into a running Mark VIe system?

We strongly advise against it. The DSPXH1BCA has shown unpredictable behavior when inserted into a powered backplane, and any glitch on speed feedback can trigger overspeed protection logic. Schedule a controlled outage, de-energize the rack, and swap it during planned maintenance. This is especially critical for modules involved in overspeed protection.

What is the difference between the IS200DSPXH1BBA and the IS200DSPXH1BCA?

The BCA has a specific hardware configuration with unique input filtering and signal conditioning characteristics that differ from the BBA. The BBA also has enhanced load drive, but with different filtering characteristics. The exact differences vary by production batch. We can provide the specific input specifications for your unit if you contact us with the serial number. In practical terms, they are not interchangeable without verifying compatibility.

What is the difference between the IS200DSPXH1AAA and the IS200DSPXH1BCA?

The BCA has enhanced load drive capability and a specific hardware configuration with different input filtering characteristics compared to the AAA. The AAA is the premium variant with maximum accuracy and frequency range. The BCA was produced for specific OEM applications requiring particular signal conditioning and drive characteristics. Use the AAA for maximum performance; use the BCA if you need this specific hardware configuration for compatibility reasons.

What is the specific input configuration on the BCA?

The BCA includes specific input filtering and signal conditioning circuits with enhanced load drive capability. The exact characteristics vary by production batch. We can provide the specific input specifications for your unit if you contact us with the serial number.

I currently have an IS200DSPXH1AAA installed. Can I replace it with this BCA?

Physically, yes – same slot, same termination board. However, the BCA has different input characteristics that may affect speed measurement. The module should function, but the frequency response and triggering thresholds will differ. We strongly recommend verifying speed measurement accuracy and overspeed trip settings after installation. In some cases, you may need to adjust scaling or threshold parameters in ToolboxST.

What types of speed sensors does this module support?

The BCA supports magnetic pickups and proximity probes, but with specific input characteristics and enhanced load drive that may differ from standard DSPX variants. Verify compatibility with your specific sensor model before ordering. We can assist with sensor compatibility verification.

How does the enhanced load drive help with long cable runs?

The BCA’s enhanced input circuitry provides better signal integrity over long cable distances, reducing the risk of signal degradation or noise pickup. This is particularly important for speed sensors located far from the control cabinet.

How do I verify this is a genuine GE module?

We source exclusively from GE-authorized liquidations. Our verification includes OEM packaging inspection, serial number cross-check against GE records, and PCB inspection for GE-specific markings. We test all 3 channels with a calibrated frequency source. We provide PCB photographs upon request.

Will I lose any configuration data when I replace the module?

Speed modules have minimal user-configurable parameters. Sensor type and scale factors are stored in the module’s EEPROM. You will need to reconfigure the new module in ToolboxST after installation. Take note of your current settings before replacement.

What is the expected lifespan of this unit?

We see MTBF around 145,000 hours for the BCA revision. The enhanced input components are robust. We have seen these units exceed 18 years in field service.

What happens if the module fails within the warranty period?

We cross-ship a tested replacement from our dedicated DSPX swap-pool the same business day. You return the failed unit within 15 days. Our repair depot has an average 48-hour turnaround. You receive a BCA replacement.

Which termination board should I use with this module?

The IS200DSPXH1BCA mates with GE’s TS200DSP1 or TS200DSP2 termination boards. Check ribbon cable orientation; pin 1 has a red stripe. We include a wiring diagram PDF with every order.

TRICONEX-3608E PLC
TRICONEX-3507E PLC
TRICONEX-3504E PLC
TRICONEX-3603E PLC