Email: jiedong@sxrszdh.com
Phone / Wechat：+86 15340683922Description
Product Introduction
This GE F31X308PCSAAG1 is a power supply and distribution board for GE’s drive and excitation control platforms. The “PCS” designation identifies this as a Power Control/Supply board, providing regulated DC power for control system components.
The board converts incoming AC or DC power into multiple regulated DC outputs required by the control system. It includes overcurrent, short-circuit, and thermal protection on all outputs, along with status LED indicators for each output.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | GE (General Electric) |
| Model Number | F31X308PCSAAG1 |
| Product Type | Power Supply Board |
| Input Voltage | 120/240 VAC or 125 VDC |
| Output Voltage 1 | +5 VDC (logic supply) |
| Output Voltage 2 | +24 VDC (field supply) |
| Output Voltage 3 | ±15 VDC (analog supply) |
| Output Current (5V) | Up to 5 A continuous |
| Output Current (24V) | Up to 3 A continuous |
| Output Current (±15V) | Up to 1 A each |
| Protection | Overcurrent, short-circuit, thermal |
| Status Indication | LED indicators for each output |
| Communication | Backplane connector |
| Operating Temperature | 0 to +55 °C |
| Storage Temperature | -40 to +85 °C |
| Board Dimensions | Standard 6U or custom form factor |
Key Selling Points & Differentiators
- Multiple Regulated Outputs: Provides +5 VDC, +24 VDC, and ±15 VDC from a single board.
- Comprehensive Protection: Overcurrent, short-circuit, and thermal protection on all outputs. Auto-reset after fault clearance.
- Status Indication: LED indicators for each output allow quick visual confirmation of power status.
- Quantified Testing Protocol: We test each output under full load for 8 hours. Voltage regulation and ripple are verified.
- Warranty & Support: 2-year functional warranty with power budget calculator.
Frequently Asked Questions (FAQ)
Q1: What is the difference between the PCSAAG1 and other power boards?
A: The PCSAAG1 is the standard power supply board for the F31X series. Other variants may have different output configurations, higher current ratings, or additional features like battery backup.
Q2: Can this board power field devices like sensors and solenoids?
A: Yes, the 24 VDC output at 3 A is suitable for powering field devices. However, check the total current draw. If it exceeds 3 A, you will need an external power supply or a higher-capacity variant.
Q3: What is the ripple specification on the 24 V output?
A: The 24 V output has a ripple of less than 50 mV peak-to-peak at full load.
Q4: Does this board have battery backup?
A: The standard PCSAAG1 does not have battery backup. Some variants in the 308 series include battery backup for parameter retention.
Q5: What is the lifecycle status of the PCSAAG1?
A: This board is discontinued. We have a limited quantity of new surplus units. We recommend proactive replacement of aging power boards—capacitors typically degrade after 10 years of operation.
SST 5136-DNP-PCI
HONEYWELL CC-PAIM01
Fanuc/ ǿ A06B-6117-H209 E
A-B 2711-K5A2
Email: sales@plcfcs.com- Phone：+86 15343416922
- Wechat：+86 15343416922
Wechat：+86 15343416922PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider
DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation,YOKOGAWA, Woodword, HIMA
TSI : Triconex , HIMA , Bently Nevada , ICS Triplex
Complete service we offer
Payment: T/T
Delivery: 1-2 days
Shipment: DHL UPS FedEx, etc
After-sales service: Yes, 24/7 hours
