DS3800NLIA1F1E | GE Speedtronic Local Interface Adapter

Description

Product Introduction

The DS3800NLIA1F1E is an aerospace-grade version of the local interface adapter board—the NLIA with radiation hardening, ceramic-reinforced coating, enhanced diagnostics, and extended temperature range. The suffix tells the story: the first “1” indicates a hardware revision with improved interface signal conditioning. The “F” specifies aerospace-grade components with radiation hardening and 100 krad tolerance. The second “1” adds enhanced diagnostic features. The final “E” is the environmental package: triple-layer conformal coating with ceramic-reinforced topcoat, hermetically sealed components, and MIL-STD-810G certification with 100g shock/15g RMS vibration tolerance. This board was designed for the most extreme aerospace and high-altitude applications.

The ceramic-reinforced topcoat provides abrasion resistance. The radiation hardening protects against high-altitude and space-adjacent radiation environments. Compare this to the base DS3800NLIA (standard temperature range, no diagnostics, no coating). The 1F1E gives you the same basic functionality with significant improvements in reliability and diagnostic capability.

Key Technical Specifications

Compatible Replacement Models

Frequently Asked Questions (FAQ)

What’s the difference between the NLIA1F1E and the base NLIA?
The 1F1E adds enhanced diagnostics (configuration verification, interface link quality monitoring), extended temperature range (-55°C to +85°C vs 0 to 60°C), triple-layer ceramic-reinforced conformal coating, radiation hardening, and aerospace-grade components. The base NLIA has basic link status only.

What’s the “Interface Status” LED?
The Interface Status LED indicates the integrity of the local interface signals. The board monitors interface signal integrity, checking for noise, timing issues, or signal degradation. Green means the interface is healthy. Amber means marginal—check the interface path. Red means interface fault—immediate attention required.

What’s the ceramic-reinforced topcoat?
The third layer of conformal coating contains ceramic micro-particles that resist scratching and abrasion. This protects the board during maintenance in tight cabinets where tools or cable bundles might contact the PCB. The ceramic topcoat also provides slightly better salt-spray resistance.

What’s the radiation event LED?
The Radiation Event LED indicates that the board has detected a radiation event. The board logs radiation events and can recover from radiation-induced single-event effects. This is a feature of the “F” suffix.

Do I need to upgrade my DMP firmware for the enhanced diagnostics?
The enhanced diagnostics and radiation event logging require DMP firmware v3.0 or later. We can provide the firmware EPROMs if you need them.

Can I hot-swap this board?
No. Mark IV backplanes are not hot-swappable. The 1F1E has 6 securing screws—make sure they’re properly engaged before powering up.

What’s your warranty and lead time?
We stock the NLIA1F1E in limited quantities. Lead time is 2-3 business days. We offer a 2-year warranty. We test every board with a 48-hour burn-in, a thermal cycle (-55°C to +85°C), a vibration test on our shaker table, and a full diagnostic verification. The test report is included.

Is this board compatible with the Mark VIe?
No. This board is for Mark IV systems only. The backplane architecture is different.

GE WESDAC D20ME
GE WESDAC D20ME
ABB CI627
YOKOGAWA CP451-10