DS3800NHVL1C1C | OEM GE Speedtronic High-Voltage I/O

Description

Product Introduction

The DS3800NHVL1C1C is a premium version of the high-voltage line interface board—the NHVL with extended temperature range, dual-layer UV-resistant coating, and enhanced diagnostics. The suffix tells the story: the first “1” indicates a hardware revision with improved isolation and signal conditioning. The “C” specifies extended temperature range components with higher-grade capacitors. The second “1” adds enhanced diagnostic features. The final “C” is the environmental package: dual-layer conformal coating with UV-resistant topcoat. This board was designed for installations where extended temperature range, UV exposure, and better diagnostic feedback were all required for high-voltage line applications.

The dual-layer conformal coating with UV protection ensures the board survives in outdoor enclosures, coastal installations, or any environment with UV exposure. Compare this to the base DS3800NHVL (standard temperature range, no diagnostics, no coating). The 1C1C gives you the same basic functionality with significant improvements in reliability and diagnostic capability.

Key Technical Specifications

Compatible Replacement Models

Frequently Asked Questions (FAQ)

What’s the difference between the NHVL1C1C and the base NHVL?
The 1C1C adds enhanced diagnostics (configuration verification, line signal monitoring), extended temperature range (-40°C to +70°C vs 0 to 60°C), and dual-layer UV-resistant conformal coating. The base NHVL has basic link status only.

What’s the “Line Status” LED?
The Line Status LED indicates the integrity of the line signals passing through the interface. The board monitors signal amplitude and noise levels. Green means good. Amber means marginal. Red means poor—check the field wiring.

Will the UV topcoat degrade over time?
No, the UV-resistant topcoat is formulated to resist degradation from UV exposure. In our accelerated aging tests (1,000 hours of UV exposure), the topcoat showed no yellowing or cracking.

Do I need to upgrade my DMP firmware for the enhanced diagnostics?
The enhanced diagnostics require DMP firmware v3.0 or later. We can provide the firmware EPROMs if you need them.

What’s the voltage rating of this board?
The voltage rating depends on the specific configuration. Check the board’s label or your system documentation for the exact voltage rating.

Can I hot-swap this board?
No. Mark IV backplanes are not hot-swappable. Power down the cabinet, lock out the breaker, and wait 60 seconds before removing or installing the board.

What’s your warranty and lead time?
We stock the NHVL1C1C in limited quantities. Lead time is 1-2 business days. We offer a 1-year warranty. We test every board with a 24-hour burn-in and a diagnostic verification. The test report is included.

Is this board compatible with the Mark VIe?
No. This board is for Mark IV systems only. The backplane architecture is different.

GE DS200DCFBG1BLC
REXROTH MKD090B-047-GP0-KN
Schneider 140CPU67160
NEC FC-9821KE